參數資料
型號： TSC251G1DXXX-24IA
英文描述： IC CYCLONE III FPGA 5K 144 EQFP
中文描述： 微控制器
文件頁數： 28/63頁
文件大?。?/td> 878K
代理商： TSC251G1DXXX-24IA
Rev. A - May 7, 1999
28
TSC80251G2D
8. Programming and Verifying Non-Volatile Memory
8.1 Internal Features
The internal non-volatile memory of the TSC80251G2D derivatives contains five different areas:
G
Code Memory
G
Configuration Bytes
G
Lock Bits
G
Encryption Array
G
Signature Bytes
8.1.1 EPROM/OTPROM Devices
All the internal non-volatile memory but the Signature Bytes of the TSC87251G2D products is made of EPROM
cells. The Signature Bytes of the TSC87251G2D products are made of Mask ROM.
The TSC87251G2D products are programmed and verified in the same manner as T
EMIC
’s TSC87251G1A, using
a SINGLE-PULSE algorithm, which programs at V
PP
= 12.75V using only one 100
μ
s pulse per byte. This results
in a programming time of less than 10 seconds for the 32 Kbytes on-chip code memory.
The EPROM of the TSC87251G2D products in Window package is erasable by Ultra-Violet radiation
(1)
(UV).
UV erasure set all the EPROM memory cells to one and allows a reprogramming. The quartz window must be
covered with an opaque label
(2)
when the device is in operation. This is not so much to protect the EPROM array
from inadvertent erasure, as to protect the RAM and other on-chip logic. Allowing light to impinge on the silicon
die during device operation may cause a logical malfunction.
The TSC87251G2D products in plastic packages are One Time Programmable (OTP). Then an EPROM cell cannot
be reset by UV once programmed to zero.
Notes:
1. The recommended erasure procedure is exposure to ultra-violet light (at 2537 ) to an integrated dose of at least 20 W-sec/cm
2
. Exposing
the EPROM to an ultra-violet lamp of 12000
μ
W/cm
2
rating for 30 minutes should be sufficient.
2. Erasure of the EPROM begins to occur when the chip is exposed to light wavelength shorter than 4000 . Since sunlight and fluorescent
light have wavelength in this range, exposure to these light sources over an extended time (1 week in sunlight or 3 years in room-level
fluorescent lighting) could cause inadvertent erasure.
8.1.2 Mask ROM Devices
All the internal non-volatile memory of TSC83251G2D products is made of Mask ROM cells. They can only be
verified by the user, using the same algorithm as the EPROM/OTPROM devices.
8.1.3 ROMless Devices
The TSC80251G2D products do not include on-chip Configuration Bytes, Code Memory and Encryption Array.
They only include Signature Bytes made of Mask ROM cells which can be read using the same algorithm as the
EPROM/OTPROM devices.
8.2 Security Features
In some microcontrollers applications, it is desirable that the user’s program code be secured from unauthorized
access. The TSC83251G2D and TSC87251G2D offer two kinds of protection for program code stored in the on-
chip array:
G
Program code in the on-chip Code Memory is encrypted when read out for verification if the Encryption Array is
programmed.
G
A three-level lock bit system restricts external access to the on-chip code memory.
相關PDF資料
PDF描述
TSC87251G2D-L16CB 8/16-bit Microcontroller with Serial Communication Interfaces
TSC87251G2D-L16CED 8/16-bit Microcontroller with Serial Communication Interfaces
TSC87251G2D-16CB 8/16-bit Microcontroller with Serial Communication Interfaces
TSC87251G2D-24CB 8/16-bit Microcontroller with Serial Communication Interfaces
TSC87251G2D-24IA 8/16-bit Microcontroller with Serial Communication Interfaces
相關代理商/技術參數
參數描述
TSC251G1DXXX-24IB 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
TSC251G1DXXX-L12CB 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:Extended 8?bit Microcontroller with Serial Communication
TSC251G1DXXX-L12CED 制造商:TEMIC 制造商全稱:TEMIC Semiconductors 功能描述:Extended 8?bit Microcontroller with Serial Communication
TSC251G1DXXX-L16CB 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
TSC251G1DXXX-L16CED 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*