參數資料
型號: TPS65100RGE
廠商: Texas Instruments, Inc.
英文描述: TRIPLE OUTPUT LCD SUPPLY WITH LINEAR REGULATOR AND VCOM BUFFER
中文描述: 三路輸出液晶供應線性穩壓器和VCOM緩沖器
文件頁數: 6/25頁
文件大小: 816K
代理商: TPS65100RGE
www.ti.com
TPS65100
TPS65105
SLVS496B–SEPTEMBER 2003–REVISED MARCH 2004
DEVICE INFORMATION (continued)
Terminal Functions
TERMINAL
I/O
DESCRIPTION
NO.
(PWP)
4
NO.
(RGE)
7
NAME
VIN
I
Input voltage pin of the device
Enable pin of the device. This pin should be terminated and not be left floating. A logic
high enables the device and a logic low shuts down the device.
Compensation pin for the main boost converter. A small capacitor is connected to this
pin.
Positive input terminal of the VCOM buffer. When the VCOM buffer is not used, this
terminal can be connected to GND to reduce the overall quiescent current of the IC.
Enable pin of the linear regulator controller. This pin should be terminated and not be
left floating. Logic high enables the regulator and a logic low puts the regulator in
shutdown.
Positive terminal of the charge pump flying capacitor
Negative terminal of the charge pump flying capacitor
External charge pump driver
Feedback pin of negative charge pump
Internal reference output typically 1.23 V
Feedback pin of the linear regulator controller. The linear regulator controller is set to a
fixed output voltage of 3.3 V or 3.0 V depending on the version.
Base drive output for the external transistor
Ground
Power ground
VCOM buffer output
Feedback pin of positive charge pump
Positive charge pump output
Negative terminal of the charge pump flying capacitor and charge pump MODE pin. If
the flying capacitor is connected to this pin, the converter operates in a voltage tripler
mode. If the charge pump needs to operate in a voltage doubler mode, the flying
capacitor is removed and the C2-/MODE pin should be connected to GND.
Positive terminal for the charge pump flying capacitor. If the device runs in voltage
doubler mode, this pin should be left open.
Supply pin of the positive, negative charge pump, boost converter gate drive circuit,
and VCOM buffer. This pin should be connected to the output of the main boost
converter and cannot be connected to any other voltage source. For performance
reasons, it is not recommended for a bypass capacitor to be connected directly to this
pin.
Feedback pin of the boost converter
Switch pin of the boost converter
The PowerPad or exposed thermal die needs to be connected to the power ground
pins (PGND)
EN
24
3
I
COMP
22
1
VCOMIN
11
14
I
ENR
23
2
I
C1+
C1-
DRV
FB2
REF
FB4
16
17
18
21
20
2
19
20
21
24
23
5
O
I
O
I
BASE
GND
PGND
VCOM
FB3
OUT3
3
19
7, 8
10
12
13
6
22
O
10, 11
13
15
16
O
I
O
C2-/MODE
15
18
C2+
14
17
SUP
9
12
I
FB1
SW
PowerPAD/
Thermal Die
1
4
I
I
5, 6
8, 9
6
相關PDF資料
PDF描述
TPS65105RGE TRIPLE OUTPUT LCD SUPPLY WITH LINEAR REGULATOR AND VCOM BUFFER
TPS65111 Triple Chargepump for LTPS LCD
TPS65110RGE LTPS LCD BIAS POWER SUPPLY TRIPLE CHARGE PUMP
TPS65111RGE LTPS LCD BIAS POWER SUPPLY TRIPLE CHARGE PUMP
TPS65121RGT SINGLE-INDUCTOR QUADRUPLE-OUTPUT TFT LCD POWER SUPPLY
相關代理商/技術參數
參數描述
TPS65100RGER 功能描述:LCD 驅動器 Triple-Out TFT LCD Supply w/VCOM Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65100RGERG4 功能描述:LCD 驅動器 Triple-Out TFT LCD Supply w/VCOM Buffer RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65101PWP 功能描述:LCD 驅動器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65101PWPG4 功能描述:LCD 驅動器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
TPS65101PWPR 功能描述:LCD 驅動器 Triple Output LCD Supply RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube