參數資料
型號： TPS650732TRSLRQ1
廠商： TEXAS INSTRUMENTS INC
元件分類： 電源管理
英文描述： POWER SUPPLY SUPPORT CKT, PQCC48
封裝： 6 X 6 MM, 0.4 MM PITCH, GREEN, PLASTIC, QFN-48
文件頁數： 49/90頁
文件大?。?/td> 1375K
代理商： TPS650732TRSLRQ1
www.ti.com
SLVSAP7 – JANUARY 2011
CON_CTRL1. Register Address: 0Dh
CON_CTRL1
B7
B6
B5
B4
B3
B2
B1
BO
DCDC1
DCDC2
DCDC3
LDO1
LDO2
Bit name and function
DCDC_SQ2
DCDC_SQ1
DCDC_SQ0
ENABLE
Default for
1
–70, –72, -73, -732
1
0
for TPS65731 only
DCDC1_E
DCDC2_EN DCDC3_EN
Set by signal
LDO_ENZ
NZ
Z
Default value loaded by:
UVLO
Read/write
R/W
The CON_CTRL1 register can be used to disable and enable all power supplies via the serial interface. Default
is to allow all supplies to be on, providing the relevant enable pin is high. The following tables indicate how the
enable pins and the CON_CTRL1 register are combined. The CON_CTRL1 Bits are automatically reset to
default when the corresponding enable pin is low.
Bit 7..5
DCDC_SQ2 to DCDC_SQ0: power-up sequencing (power down sequencing is the reverse)
000 = power-up sequencing is: DCDC2 only; DCDC1 and DCDC3 are not part of the automatic
sequencing and are enabled by their enable pins EN_DCDC1 and EN_DCDC3
001 = power-up sequencing is DCDC2 and DCDC3 at the same time, DCDC1 is not part of the
automatic sequencing and is enabled by its enable pin EN_DCDC1
010 = power-up sequencing is: DCDC1 when power good then DCDC2 and DCDC3 at the same time
011 = power-up sequencing is: DCDC3 when power good then DCDC2; DCDC1 is not part of the
automatic sequencing and is controlled by its EN_DCDC1 pin.
100 = power-up sequencing is: DCDC3 is started at the same time with LDO2 if Bit
MASK_EN_DCDC3 in register 0Eh is set (default is set). DCDC1 and DCDC2 are started at the same
time when LDO2 is PGOOD (defined in LDO sequencing 111); DCDC3 is enabled or disabled with its
EN_DCDC3 pin if MASK_EN_DCDC3 in register 0Eh is cleared (set =0). (Sirf PRIMA, start-up from
OFF or start-up after SLEEP)
101 = DCDC converters are enabled individually with the external enable pins
110 = DCDC1first, when power good then DCDC2, when power good then DCDC3
111 = power-up sequencing is: DCDC1 and DCDC2 at the same time >1ms after LDO2 has been
started (defined in LDO sequencing 010); DCDC3 is not part of the automatic sequencing but is
enabled with its EN_DCDC3 pin (Atlas4)
In case of automatic sequencing other than 101, the start is initiated by going into ON-state. DCDC converters
that are not part of the automatic sequencing can be enabled by pulling their enable pin to a logic HIGH level at
any time in ON-state. The enable pins for the converters that are automatically enabled, should be tied to GND.
For sequencing option DCDC_SEQ=111, the start is initiated by going into ON-state, however, the external LDO
connected to pin EN_EXTLDO is powered first, followed by LDO2.
(The sequencing of LDO1 and LDO2 is defined in register LDO_CTRL1)
Copyright 2011, Texas Instruments Incorporated
53
相關PDF資料
PDF描述
TPS65110RGEG3 SWITCHED CAPACITOR REGULATOR, 520 kHz SWITCHING FREQ-MAX, PQCC24
TPS65130RGER 0.9 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PQCC24
TPS65130RGET 0.9 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PQCC24
TPS65131RGETG4 2.2 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PQCC24
TPS65130RGE 0.9 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PQCC24
相關代理商/技術參數
參數描述
TPS65073EVM-430 功能描述:電源管理IC開發工具 TPS65073 Eval Mod RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V
TPS65073RSLR 功能描述:PMIC 解決方案 5Ch Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 安裝風格:SMD/SMT 封裝 / 箱體:QFN-24 封裝:Reel
TPS65073RSLT 功能描述:PMIC 解決方案 5Ch Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 安裝風格:SMD/SMT 封裝 / 箱體:QFN-24 封裝:Reel
TPS650830EVM-095 功能描述:TPS650830 - Power Management, Special Purpose: Mobiles Evaluation Board 制造商:texas instruments 系列:- 零件狀態:有效 主要用途:電源管理，專用型： 手機 嵌入式:- 使用的 IC/零件:TPS650830 主要屬性:- 輔助屬性:圖形用戶接口，I2C 接口 所含物品:板 標準包裝:1
TPS650830ZAJT 功能描述:- Converter, Mobile PCs Voltage Regulator IC 8 Output 168-NFBGA (7x7) 制造商:texas instruments 系列:- 包裝:剪切帶（CT） 零件狀態:有效 應用:轉換器，移動式個人電腦 電壓 - 輸入:5.4 V ~ 24 V 輸出數:8 電壓 - 輸出:多重 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:168-TFBGA 供應商器件封裝:168-NFBGA（7x7） 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*