
Titan 19244
Supports Path REI error counting
and Path RDI monitoring
■
Supports detection of path
unequipped and payload label
mismatch (Signal Label Mismatch)
■
Provides four 16-bit LVDS parallel
buses operating at 622 Mbit/s on
the line side for quad STS-192
■
Compliant with SFI-4 standard on
the Line Side Interface
■
Provides four 16-bit LVDS parallel
buses at 622 MHz (STS-192
SONET links) on the system side
■
Supports IEEE1149.1 JTAG testing
■
Supports a 32-bit MPC860
Motorola microprocessor
interface
■
Meets ITU G.707, GR-253,
GR-1377, and ANSI T1.105
■
1413-pin flip-chip BGA package
processing
■
Calculates, monitors, and counts
the Section BIP-8 (B1), Line BIP-8N
(B2), and Path BIP-8 (B3) errors
P
R O D U C T
B
R I E F
N e v e r s t o p t h i n k i n g .
■
Supports BER algorithm for Signal
Fail (SF) and Signal Degrade (SD)
■
Supports Terminal Loopback and
Facility Loopback
Applications
■
SONET/SDH Digital Cross-Connects
■
SONET/SDH Terminal Multiplexers
■
Long Haul and Metro Network ADM
■
Dense Wave Division Multiplexers
■
SONET/SDH Add/Drop Multiplexers
■
Multi-Service Provisioning
Platforms
Features
■
Quad-port STS-192/STM-64
SONET/SDH framer and pointer
processor
■
Terminates and generates section
and line overhead layer for
STS-192/STM-64
■
Supports pointer processing at
STS-1 granularity for
STS-192/STM-64
■
Supports flexible concatenation of
payloads STS-2c, STS-3c, STS-4c,
STS-5c, … STS-12c, … STS-48c, …
STS-192c
■
Performs frame synchronous
scrambling and de-scrambling of
STS-192
■
Drops/Inserts section and line
overhead data bytes in the
receive/transmit direction onto an
external bus on both line side &
system side
■
Drops/Inserts Data
Communications Channel (DCC)
bytes D1-D3, D4-D12 on a serial link
■
Provides hardware assistance for
APS via K1 & K2 bytes. A separate
APS interrupt port is provided per
port for quad STS-192/STM-64
■
Supports external timing mode
■
Detects Severely Errored Framing
(SEF), Loss Of Signal (LOS), Loss
Of Frame (LOF), Loss Of Pointer
(LOP), and Loss Of Clock (LOC)
■
Monitors Line Alarm Indication
Signal (AIS-L), Line Remote Defect
Indication (RDI-L), and Line
Remote Error Indication (REI-L)
■
Handles section trace identifier
(J0) and path trace identifier (J1)
T i t a n 1 9 2 4 4
SONET/SDH Framer & Pointer Processor
Semiconductor Solutions for
High Speed Communications
and Fiber Optic Applications
The Titan 19244 is a highly integrated single chip quad-
port STS-192 SONET/SDH TDM framer and pointer
processor device.
The Titan 19244 provides section, line, and path over-
head processing for quad STS-192/STM-64. The framer
itself takes four 10 Gbit/s (16-bit bus at 622 Mbit/s)
channels on the line side interface, which is compliant
with SFI-4 standard. The framer outputs four STS-192
SONET links on the system side. The system block dia-
gram on the next page depicts a configuration for a quad
OC-192 TDM framer and pointer processor application.
The Titan 19244 is compliant with SONET/SDH standards
ITU G.707, Bellcore GR-253, GR-1377, and ANSI T1.105.