參數資料
型號: TDA8340
廠商: NXP SEMICONDUCTORS
元件分類: 接收器
英文描述: Television IF amplifier and demodulator
中文描述: AM, VIDEO DISCRIMINATOR, PDIP16
封裝: PLASTIC, SOT-38, DIP-16
文件頁數: 14/14頁
文件大?。?/td> 111K
代理商: TDA8340
November 1987
14
Philips Semiconductors
Product specification
Television IF amplifier and demodulator
TDA8340
TDA8341
SOLDERING
Introduction
There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and
surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for
surface mounted ICs, or for printed-circuits with high population densities. In these situations reflow soldering is often
used.
This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our
“IC Package Databook”(order code 9398 652 90011).
Soldering by dipping or by wave
The maximum permissible temperature of the solder is 260
°
C; solder at this temperature must not be in contact with the
joint for more than 5 seconds. The total contact time of successive solder waves must not exceed 5 seconds.
The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the
specified maximum storage temperature (T
stg max
). If the printed-circuit board has been pre-heated, forced cooling may
be necessary immediately after soldering to keep the temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the lead(s) of the package, below the seating plane or not more
than 2 mm above it. If the temperature of the soldering iron bit is less than 300
°
C it may remain in contact for up to
10 seconds. If the bit temperature is between 300 and 400
°
C, contact may be up to 5 seconds.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specification
Preliminary specification
Product specification
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
相關PDF資料
PDF描述
TDA8341 Television IF amplifier and demodulator
TDA8349 Multistandard IF amplifier and demodulator
TDA8349A Multistandard IF amplifier and demodulator
TDA8350 DC-coupled vertical deflection and East-West output circuit
TDA8350Q DC-coupled vertical deflection and East-West output circuit
相關代理商/技術參數
參數描述
TDA8341 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Television IF amplifier and demodulator
TDA8349 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard IF amplifier and demodulator
TDA8349A 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard IF amplifier and demodulator
TDA8350 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:DC-coupled vertical deflection and East-West output circuit
TDA8350Q 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:DC-coupled vertical deflection and East-West output circuit