- 您現在的位置：買賣IC網 > PDF目錄384965 > TDA4814 (SIEMENS AG) Power Factor Controller IC for High Power Factor and Active Harmonic Filter PDF資料下載
參數資料
| 型號： | TDA4814 |
| 廠商： | SIEMENS AG |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | Power Factor Controller IC for High Power Factor and Active Harmonic Filter |
| 中文描述： | 功率因數控制器IC，用于高功率因數，有源諧波濾波器 |
| 文件頁數： | 4/14頁 |
| 文件大?。?/td> | 312K |
| 代理商： | TDA4814 |
Semiconductor Group
4
TDA 4814
Circuit Description
This device has a conditioning circuit for the internal power supply. It allows standby operation with
very low current consumption (less than 0.5 mA), a hysteresis between enable and switch-off levels
and an internal voltage stabilization. An integrated Z-diode limits the voltage on
V
S
, when
impressed current is fed.
The
output driver (Q SIP)
is controlled by detector input and current comparator.
The
detector input (
I
DET)
which is highly resistive in the operating state reacts on hysteresis-
determined voltage levels. To keep down the amount of circuitry required, clamping diodes are
provided which allow control by a current source.
The operating state of the boost converter choke is sensed via the detector input. H-level means
that the choke discharges and the output driver is inhibited. H-level sets a flip-flop, which stores the
switch-off instruction of the current comparator to reduce susceptibility to interference. As soon as
demagnetization is finished the choke voltage reverses and the detector input is set to L-level, thus
enabling the output driver. This ensures that the choke is always currentless when the SIPMOS
transistor switches on and that no current gaps appear.
The nominal voltage of the multiplier output is compared to the voltage derived from the actual line
current
(–
I
COMP)
, thus setting the switch-off threshold of the comparator. The current comparator
blocks the output driver when the nominal peak value of the choke current given by the multiplier
output is reached.
This state is maintained in the flip-flop until H-level appears at detector input which takes over the
hold function and resets the flip-flop.
Operating states might occur without any useful detector signal. This is the case with magnetic
saturation of the choke and when the input voltage approaches or exceeds the output voltage as,
for example, during switch-on. The driver remains inhibited for the flip-flop due to the absent set
signal.
The trigger signal can be derived from the subsequent lamp generator, a SMPS control device or,
if neither one of them is available, from the start circuit designed as a pulse generator in the
TDA 4814. The trigger signal level should be so low that with standard operation the signal from the
detector winding dominates.
The multiplier delivers the preset nominal value for the current comparator by multiplying the input
voltage, which determines the nominal waveform
(
I
M1)
and the output voltage of the control
amplifier.
The control amplifier stabilizes the output dc voltage of the active harmonic filter in the event of load
and input voltage changes. The
control amplifier
compares the actual output voltage to a
reference voltage which is provided in the IC and stable with temperature.
相關PDF資料 |
PDF描述 |
|---|---|
| TDA4817 | Power Factor Controller IC for High Power Factor and Active Harmonic Filtering |
| TDA4817G | Power Factor Controller IC for High Power Factor and Active Harmonic Filtering |
| TDA4862 | Power-Factor Controller PFC IC for High Power Factor and Active Harmonic Filter |
| TDA4862G | Power-Factor Controller PFC IC for High Power Factor and Active Harmonic Filter |
| TDA4916GG | SMPS-IC with MOSFET Driver Output |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA4814A | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Active Harmonic Filter |
| TDA4817 | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Active Harmonic Filtering |
| TDA4817G | 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:Power Factor Controller IC for High Power Factor and Active Harmonic Filtering |
| TDA4820 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| TDA4820T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Sync separation circuit for video applications |
發布緊急采購，3分鐘左右您將得到回復。