- 您現在的位置：買賣IC網 > PDF目錄361364 > TC1014-3.0VCT (TelCom Semiconductor, Inc.) 50mA CMOS LDO WITH SHUTDOWN AND REFERENCE BYPASS PDF資料下載
參數資料
| 型號： | TC1014-3.0VCT |
| 廠商： | TelCom Semiconductor, Inc. |
| 英文描述： | 50mA CMOS LDO WITH SHUTDOWN AND REFERENCE BYPASS |
| 中文描述： | 50mA的CMOS LDO穩壓器具有關斷和基準旁路 |
| 文件頁數： | 3/10頁 |
| 文件大?。?/td> | 109K |
| 代理商： | TC1014-3.0VCT |
TC1014
3
PRELIMINARY INFORMATION
TC1014-01-6/5/97
50mA CMOS LDO WITH SHUTDOWN
AND REFERENCE BYPASS
Pin No.
(SOT-23A-5)
1
2
3
V
IN
GND
SHDN
Unregulated supply input.
Ground terminal.
Shutdown control input. The regulator is fully enabled when a logic high is applied to this
input. The regulator enters shutdown when a logic low is applied to this input. During
shutdown, output voltage falls to zero, and supply current is reduced to under 1 microamp
(typical).
Reference bypass input. Connecting a 470pF to this input further reduces output noise.
Regulated voltage output.
4
5
Bypass
V
OUT
PIN DESCRIPTION
Symbol
Description
DETAILED DESCRIPTION
The TC1014 is a precision fixed output voltage regula-
tor. (If an adjustable version is desired, please see the
TC1070 or TC1071 data sheets.) Unlike the bipolar regula-
tors, the TC1014 supply current does not increase with load
current. In addition, V
OUT
remains stable and within regula-
tion at very low load currents (an important consideration in
RTC and CMOS RAM battery back-up applications).
Figure 1 shows a typical application circuit. The regula-
tor is enabled any time the shutdown input (SHDN) is at or
above V
IH
, and shutdown (disabled) when SHDN is at or
below V
IL
. SHDN may be controlled by a CMOS logic gate,
or I/O port of a microcontroller. If the SHDN input is not
required, it should be connected directly to the input supply.
While in shutdown, supply current decreases to 0.05
μ
A
(typical) and V
OUT
falls to zero volts.
Bypass Input
A 470pF capacitor connected from the Bypass input to
ground reduces noise present on the internal reference,
which in turn significantly reduces output noise. If output
noise is not a concern, this input may be left unconnected.
Larger capacitor values may be used, but results in a longer
time period to rated output voltage when power is initially
applied.
Output Capacitor
A 1
μ
F (min) capacitor from V
OUT
to ground is recom-
mended. The output capacitor should have an effective
series resistance of 5
or less, and a resonant frequency
above 1MHz. A 1
μ
F capacitor should be connected from V
IN
to GND if there is more than 10 inches of wire between the
regulator and the AC filter capacitor, or if a battery is used as
the power source. Aluminum electrolytic or tantalum capaci-
tor types can be used. (Since many aluminum electrolytic
capacitors freeze at approximately – 30
°
C, solid tantalums
are recommended for applications operating below – 25
°
C.)
When operating from sources other than batteries, supply-
noise rejection and transient response can be improved by
increasing the value of the input and output capacitors and
employing passive filtering techniques.
Thermal Considerations
Thermal Shutdown
Integrated thermal protection circuitry shuts the regula-
tor off when die temperature exceeds 160
°
C. The regulator
remains off until the die temperature drops to approximately
150
°
C.
Power Dissipation
The amount of power the regulator dissipates is prima-
rily a function of input and output voltage, and output current.
The following equation is used to calculate worst case
actualpower dissipation:
Figure 1. Typical Application Circuit
1
μ
F
470pF
Reference
Bypass Cap
(Optional)
Shutdown Control
(to CMOS Logic or Tie to V
IN
if Unused)
TC1014
V
IN
BATTERY
V
OUT
Bypass
SHDN
GND
V
OUT
1
μ
F
相關PDF資料 |
PDF描述 |
|---|---|
| TC1014-3.3VCT | Circular Connector; MIL SPEC:MIL-C-26482, Series I; Body Material:Aluminum Alloy; Series:MS3124; Number of Contacts:12; Connector Shell Size:14; Connecting Termination:Crimp; Circular Shell Style:Jam Nut Receptacle |
| TC1014-5.0VCT | Circular Connector; MIL SPEC:MIL-C-26482, Series I; Body Material:Aluminum Alloy; Series:MS3124; No. of Contacts:12; Connector Shell Size:14; Connecting Termination:Crimp; Circular Shell Style:Jam Nut Receptacle RoHS Compliant: No |
| TC1014 | 50mA CMOS LDO WITH SHUTDOWN AND REFERENCE BYPASS |
| TC1023VOA | PRECISION TEMPERATURE-TO-VOLTAGE CONVERTERS WITH SHUTDOWN MODE |
| TC1023VUA | PRECISION TEMPERATURE-TO-VOLTAGE CONVERTERS WITH SHUTDOWN MODE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TC1014-4.0VCT713 | 功能描述:低壓差穩壓器 - LDO 50mA LDO RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓（最大值）:307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20 |
| TC1014-5.0VCT | 制造商:TELCOM 制造商全稱:TelCom Semiconductor, Inc 功能描述:50mA CMOS LDO WITH SHUTDOWN AND REFERENCE BYPASS |
| TC1014-5.0VCT713 | 功能描述:低壓差穩壓器 - LDO 50mA LDO RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓（最大值）:307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20 |
| TC1014-5.0VCT713 | 制造商:Microchip Technology Inc 功能描述:Voltage Regulator IC Voltage Regulator T |
| TC10-14-C100 | 功能描述:電纜固定件和配件 Tack Clip, Single, .36" (9.1mm) Bundle, RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度: |
發布緊急采購，3分鐘左右您將得到回復。