參數資料
型號： T63H0008A-AX
廠商： TM Technology, Inc.
英文描述： Li-Ion/Polymer Battery for one-cell Protector
中文描述： Li-Ion/Polymer電池單細胞保護
文件頁數： 11/20頁
文件大?。?/td> 341K
代理商： T63H0008A-AX
TE
CH
tm
under the overcharge detection voltage by the internal impedance, the T63H0008A release the overcharge
T63H0008A
TM Technology, Inc. reserves the right
P. 11
Publication Date: Dec. 2003
to change products or specifications without notice. Revision:A
condition.
Note:(1).
If the battery is charged to a voltage higher than the overcharge detection voltage (VDET1) and the battery voltage does
not fall below the overcharge detection voltage (VDET1) even when a heavy load is connected, the detection of
over-current 1 , over-current 2 and load short-circuiting does not work .Since an actual battery has the internal
impedance of several dozens of mW, the battery voltage drops immediately after a heavy loadwhich causes
over-current is connected, and the detection of over-current 1, over-current 2 and load short-circuiting then works..
(2).
When a charger is connected after the overcharge detection, the overcharge condition is not released even if the battery
voltage is below the overcharge detection voltage VDET1. The overcharge condition is released when the V- pin
voltage goes over the charger detection voltage VDET 5 by removing the charger.
Over-discharge condition
When the battery voltage falls below the over-discharge detection voltage (VDET2) during discharging
under the normal condition and the detection continues for the over-discharge detection delay time
(tVDET2) or longer, the T63H0008A turns the discharging control FET off to stop discharging. This
condition is called the over-discharge condition. When the discharging control FET turns off, the V- pin
voltage is pulled up by the RV-D resistor between V- and VDD in the IC. The voltage difference between
V- and VDD then falls bellow 1.3V (typ.), the current consumption is reduced to the power-down current
consumption (ISB). This condition is called the power-down condition.The power-down condition is
released when a charger is connected and the voltage difference between V- and VDD becomes 1.3 V (typ.)
or higher. Moreover when the battery voltage becomes the over-discharge detection voltage or higher, the
T63H0008A turns the discharging FET on and returns to the normal condition.
Charger detection
When a battery in the over-discharge condition is connected to a charger and provided that the V- pin
voltage is lower than the charger detection voltage (VDET5), the T63H0008A releases the over-discharge
condition and turns the discharging control FET on as the battery voltage becomes equal to or higher than
the over-discharge detection voltage (VDET2) since the charger detection function works. This action is
called charger detection.
When a battery in the over-discharge condition is connected to a charger and provided that the V- pin
voltage is not lower than the charger detection voltage (VDET5), the T63H0008A releases the
over-discharge condition when the battery voltage reaches the over-discharge detection voltage (VDET2) +
over-discharge hysteresis (VHDT2 ) or higher.
Abnormal charge current detection
If the V- pin voltage falls below the charger detection voltage (VDET5) during charging under normal
condition and it continues for the overcharge detection delay time (tVDET1) or longer, the charging control
FET turns off and charging stops. This action is called the abnormal charge current detection. Abnormal
charge current detection works when the DOUT pin voltage is “H” and the V- pin voltage falls below the
charger detection voltage (VDET5). Consequently, if an abnormal charge current flows to an
over-discharged battery, the T63H0008A turns the charging control FET off and stops charging after the
battery voltage becomes higher than the over-discharge detection voltage which make the DOUT pin
相關PDF資料
PDF描述
T63H0008A-BX Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-CX Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-DX Li-Ion/Polymer Battery for one-cell Protector
T66H0001A 240 output LCD Segment/Common Driver IC
T66H0001A-Y 240 output LCD Segment/Common Driver IC
相關代理商/技術參數
參數描述
T63H0008A-BX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-CX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63H0008A-DX 制造商:TMT 制造商全稱:TMT 功能描述:Li-Ion/Polymer Battery for one-cell Protector
T63XA-100-10-D06 制造商:Vishay Roederstein 功能描述:RES TRMR 100 OHM 10% 1/4W 13TURN 1.8MM PIN TH - Rail/Tube
T63XA-100K-10-D06 制造商:Vishay Roederstein 功能描述:RES TRMR 100K OHM 10% 1/4W 13TURN 1.8MM PIN TH - Rail/Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*