參數資料
型號: ST16C550CJ44
廠商: STARTECH SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: Voltage Regulator IC; Package/Case:8-TSSOP; Output Current:350mA; Output Voltage:1.5V; Supply Voltage Max:6V; Current Rating:350mA; Leaded Process Compatible:No; Output Current Max:350mA; Output Voltage Max:1.5V RoHS Compliant: Yes
中文描述: 1 CHANNEL(S), 448K bps, SERIAL COMM CONTROLLER, PQCC44
文件頁數: 11/35頁
文件大?。?/td> 227K
代理商: ST16C550CJ44
ST16C550
11
Rev. 4.30
DMA Operation
The ST16C550 FIFO trigger level provides additional
flexibility to the user for block mode operation. The user
can optionally operate the transmit and receive FIFO’s
in the DMA mode (FCR bit-3). The DMA mode affects
the state of the -RXRDY and -TXRDY output pins. The
following tables show this:
-RXRDY pin:
Non-DMA mode
1 = FIFO empty
DMA mode
0 to 1 transition when FIFO
empties
1 to 0 transition when FIFO
reaches trigger level, or
timeout occurs
0 = at least 1 byte
in FIFO
-TXRDY pin:
Non-DMA mode
1 = at least 1 byte
in FIFO
0 = FIFO empty
DMA mode
1 = FIFO is full
0 = FIFO has at least 1
empty location
Loop-back Mode
The internal loop-back capability allows onboard diag-
nostics. In the loop-back mode the normal modem
interface pins are disconnected and reconfigured for
loop-back internally. In this mode MSR bits 4-7 are
also disconnected. However, MCR register bits 0-3
can be used for controlling loop-back diagnostic test-
ing. In the loop-back mode -OP1 and -OP2 in the MCR
register (bits 0-1) control the modem -RI and -CD
inputs respectively. MCR signals -DTR and -RTS (bits
0-1) are used to control the modem -CTS and -DSR
inputs respectively. The transmitter output (TX) and the
receiver input (RX) are disconnected from their associ-
ated interface pins, and instead are connected together
internally (See Figure 4). The -CTS, -DSR, -CD, and -RI
are disconnected from their normal modem control
inputs pins, and instead are connected internally to -
DTR, -RTS, -OP1 and -OP2. Loop-back test data is
entered into the transmit holding register via the user
data bus interface, D0-D7. The transmit UART serial-
izes the data and passes the serial data to the receive
UART via the nternal oop-back connection. The receive
UART converts the serial data back into parallel data
that is then made available at the user data interface,
D0-D7. The user optionally compares the received data
to the initial transmitted data for verifying error free
operation of the UART TX/RX circuits.
In this mode , the receiver and transmitter interrupts are
fully operational. The Modem Control Interrupts are also
operational. The interrupts are still controlled by the
IER.
Figure 3, TYPICAL EXTERNAL CRYSTAL OSCILLA-
TOR CONNECTION
C1
22-47pF
C2
22-47pF
Y1
1.8432 - 24 MHz
R1
0-120
(Optional)
R2
1M
XTAL1
XTAL2
相關PDF資料
PDF描述
ST16C550CP40 Voltage Regulator IC; Output Current:350mA; Output Voltage:1.8V; Package/Case:8-TSSOP; Supply Voltage Max:6V; Current Rating:350mA; Leaded Process Compatible:No; Output Current Max:350mA; Output Voltage Max:1.8V
ST16C550IP40 UART WITH 16-BYTE FIFO’s
ST16C552AIJ68 DUAL UART WITH 16-BYTE FIFO AND PARALLEL PRINTER PORT
ST16C552IJ68 DUAL UART WITH 16-BYTE FIFO AND PARALLEL PRINTER PORT
ST16C552CJ68 Voltage Regulator IC; Package/Case:8-TSSOP; Output Current:350mA; Output Voltage:2.5V; Supply Voltage Max:6V; Current Rating:350mA; Leaded Process Compatible:No; Output Current Max:350mA; Output Voltage Max:2.5V RoHS Compliant: No
相關代理商/技術參數
參數描述
ST16C550CJ44-F 功能描述:UART 接口集成電路 2.97V-5.5V 16B FIFO temp 0C to 70C; UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C550CJ44TR-F 功能描述:UART 接口集成電路 SNGL UART W/16BYTE FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C550CP40 功能描述:UART 接口集成電路 SINGLE UART W/16 BYTE FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C550CP40-F 功能描述:UART 接口集成電路 SINGLE UART W/16 BYTE FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C550CP40-F 制造商:Exar Corporation 功能描述:IC UART INTERFACE 1.5Mbps 5.5V DIP-40