- 您現在的位置：買賣IC網 > PDF目錄225231 > SRV05-4ATCT 300 W, UNIDIRECTIONAL, SILICON, TVS DIODE PDF資料下載
參數資料
| 型號： | SRV05-4ATCT |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 300 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| 封裝： | HALOGEN FREE AND ROHS COMPLIANT, PLASTIC PACKAGE-6 |
| 文件頁數： | 7/11頁 |
| 文件大?。?/td> | 218K |
| 代理商： | SRV05-4ATCT |
5
2010 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SRV05-4A
Device Connection Options for Protection of Four
High-Speed Data Lines
The SRV05-4A is designed to protect four data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V
F) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 1, 3, 4 and 6. The
negative reference (REF1) is connected at pin 2. This
pin should be connected directly to a ground plane on
the board for best results. The path length is kept as
short as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 5.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pin 5 directly to the positive supply rail (V
CC). In this
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
2. The SRV05-4A can be isolated from the power
supply by adding a series resistor between pin 5
and V
CC. A value of 100kΩ is recommended. The
internal TVS and steering diodes remain biased,
providing the advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 5 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
ESD Protection With RailClamps
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
Applications Information
相關PDF資料 |
PDF描述 |
|---|---|
| SRV05-4L-TP | UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRX6548 | QUARTZ CRYSTAL RESONATOR, 13.248 MHz |
| SRX6549 | QUARTZ CRYSTAL RESONATOR, 12.96 MHz |
| SRX6575 | QUARTZ CRYSTAL RESONATOR, 10.24 MHz |
| SS-3GLPB | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 3A, 30VDC, 1mm, THROUGH HOLE-STRAIGHT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SRV05-4ATR | 功能描述:TVS DIODE 5VWM 17.5VC SOT23 制造商:smc diode solutions 系列:- 包裝:剪切帶（CT） 零件狀態:有效 類型:轉向裝置（軌至軌） 單向通道:- 雙向通道:4 電壓 - 反向關態（典型值）:5V（最大） 電壓 - 擊穿（最小值）:6V 電壓 - 箝位（最大值）@ Ipp:17.5V 電流 - 峰值脈沖（10/1000μs）:5A（8/20μs） 功率 - 峰值脈沖:- 電源線路保護:是 應用:以太網 不同頻率時的電容:3.2pF @ 1MHz 工作溫度:-55°C ~ 125°C（TJ） 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商器件封裝:SOT-23-6 標準包裝:1 |
| SRV05-4HTG | 功能描述:TVS二極管陣列 6V 0.1uA 20kV ESD Contact RoHS:否 制造商:Littelfuse 極性: 通道:4 Channels 擊穿電壓: 鉗位電壓:11.5 V 工作電壓:2.5 V 峰值浪涌電流:20 A 安裝風格:SMD/SMT 端接類型:SMD/SMT 系列: 最小工作溫度:- 40 C 最大工作溫度:+ 85 C |
| SRV05-4L | 制造商:MCC 制造商全稱:Micro Commercial Components 功能描述:5 Volts ESD Protection Device |
| SRV05-4L_13 | 制造商:MCC 制造商全稱:Micro Commercial Components 功能描述:5 Volts ESD Protection Device Low clamping voltage |
| SRV05-4LC | 制造商:PROTEC 制造商全稱:Protek Devices 功能描述:ultra low capacitance steering diode/tvs array |
發布緊急采購，3分鐘左右您將得到回復。