
TRIM AND REMOTE SENSE (AVAILABLE ON SINGLE OUTPUT MODELS ONLY)
4
SMTR SERIES
30 WATT
DC/DC C
ONVERTERS
PIN OUT
BOTTOM VIEW
SMTR SINGLE
FLANGED AND NON-FLANGED
8
9
Dot on top of cover indicates pin one.
Dotted line outlines flanged package option.
See Figures 22 and 23 and for dimensions.
6
10
7
1
2
3
4
5
F
IGURE
3: P
IN
O
UT
S
INGLE
O
UTPUT
M
ODELS
RL
OUTPUT
COMMON
SENSE
RETURN
REMOTE SENSE CONNECTION
2 Make connections at load.
F
IGURE
2: R
EMOTE
S
ENSE2, 3
SMTR SINGLE OUTPUT CONVERTER
1
+VIN
4
3
5
10
INPUT
COMMON
6
SENSE
POSITIVE
OUTPUT
2
2
EXTERNAL TRIM CONNECTION
1 Make connections at converter.
F
IGURE
1: T
RIM
C
ONNECTION1, 2, 3
Trim Formulas
Vout = desired output voltage; Rt = trim resistor
3.3V: Rt = 1300 * Vout – 4304
1.2475
5V:
Rt = 1300 * Vout – 6512
1.2475
12V: Rt = 1300 * Vout – 15631
1.2475
15V: Rt = 1300 * Vout – 19498
1.2475
RL
OUTPUT
COMMON
SENSE
RETURN
SMTR SINGLE OUTPUT CONVERTER
1
+VIN
4
3
5
10
INPUT
COMMON
6
SENSE
POSITIVE
OUTPUT
1
RT
1
Pin
1
2
3
4
5
6
7
8
9
10
Single Output
Positive Input
Inhibit
Sense Return
Output Common
Positive Output
Positive Sense
Case Ground
Case Ground
Sync
Input Common
Dual Output
Positive Input
Inhibit
Positive Output
Output Common
Negative Output
Case Ground
Case Ground
Case Ground
Sync
Input Common
BOTTOM VIEW
SMTR DUAL
FLANGED AND NON-FLANGED
Dot on top of cover indicates pin one.
6
10
7
8
9
1
2
3
4
5
Dotted line outlines flanged package option.
F
IGURE
4: P
IN
O
UT
D
UAL
O
UTPUT
M
ODELS
See Figures 24 and 25 for dimensions.
Notes for Remote Sense and Trim
1. When trimming output voltage and/or remote sensing, the total output
voltage increase must be less than 0.6 volts at the converters pins to
maintain specified performance.
2. If neither voltage trim nor remote sense will be used, connect pin 3 to
pin 4 and pin 5 to pin 6 or the output voltage will increase by 1.2 volts.
3. CAUTION: The converter will be permanently damaged if the positive
remote sense (pin 6) is shorted to ground. Damage may also result if
the output common or positive output is disconnected from the load with
the remote sense leads connected to the load.