![](http://datasheet.mmic.net.cn/40000/SMP1321-004_datasheet_1674395/SMP1321-004_2.png)
DATA SHEET SMP1321 SERIES DIODES
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
2
April 25, 2011 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200048K
Table 1. SMP1321 Series Packaging and Marking
Single
Common Anode
Common Cathode
Series Pair
Low Inductance
Single
Anti-Parallel
SOT-23
SOD-323
Green
SC-79
Green
LGA
Green
SMP1321-001
Marking: PM1
SMP1321-003
Marking: PM9
SMP1321-004
Marking: PM3
SMP1321-005
Marking: PM2
SMP1321-007
Marking: PMB
SMP1321-508
Pb-Free
Marking: H
SMP1321-001LF
Green
Marking: RM1
SMP1321-003LF
Green
Marking: RM9
SMP1321-004LF
Green
Marking: RM3
SMP1321-005LF
Green
Marking: RM2
SMP1321-007LF
Green
Marking: RMB
SMP1321-011LF
Marking: RM
SMP1321-079LF
Marking: Cathode
LS = 1.5 nH
LS = 0.4 nH
LS = 1.5 nH
LS = 0.7 nH
LS = 0.6 nH
SC-70
SMP1321-073
Marking: PM9
SMP1321-074
Marking: PM2
SMP1321-075
Marking: PMB
SMP1321-073LF
Green
Marking: RM9
SMP1321-074LF
Green
Marking: RM2
SMP1321-075LF
Green
Marking: RM2
LS = 1.4 nH
The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green. Tin/lead (Sn/Pb) packaging is not recommended
for new designs.
Innovation to Go
Select Linear Products (indicated by
) now available for purchase online.
SMP1321-007
For the -007 configuration of the SOT-23 package, the package
inductance is effectively reduced to 0.4 nH compared to the
1.5 nH value of the standard configuration. This lower inductance
is particularly beneficial when the diodes are used as shunt
connected switches at frequencies higher than 500 MHz in which
inductance is the primary limitation on maximum switch isolation.
To achieve the effective 0.4 nH, the SOT-23 package must be
inserted in the microstrip circuit board with a gap in the trace, as
shown in Figure 1. Because of the polarity of the diode junction,
this low inductance feature is realizable only with the cathode
connected to ground.
Figure 1. SOT-23 Package Trace Gap
Electrical and Mechanical Specifications
The part number and configuration for the SMP1321 series are
provided in Table 1. The absolute maximum ratings of the
SMP1321 series are provided in Table 2. Electrical specifications
are provided in Table 3. Resistance versus temperature
measurements are provided in Table 4.
Typical performance characteristics of the SMP1321 series are
illustrated in Figures 2 to 5. Package dimensions are shown in
Figures 6 to 14 (even numbers), and tape and reel dimensions are
provided in Figures 7 to 15 (odd numbers).
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMP1321 series is rated to Moisture Sensitivity Level 1
(MSL1) at 260
°C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.