
Rev 2.6, August 1, 2010
Page 8 of 8
SL16010DC
Table 8. Ordering Information
Note:
1. SL16010DC is RoHS compliant and Halogen Free.
Product Revisions History
Revision
Date
Originator
Description
Rev 0.5
12/12/2009
C. Ozdalga
Original.
Rev 1.0
1/30/2009
C. Ozdalga
Reduce IDD-max to 18 mA from 28 mA. Change Cxin/Cxot from 4 pF to 6 pF.
Change R/R divider from 10
Ω/10kΩ to 5kΩ/5kΩ. Add Pull-down resistors
definition for SSEL0/1 pins on Pin Description Table. Improve Typical Application
Circuit. Remove LTJ for SSCLK until new specification is obtained from
customer.
Rev 1.0
2/23/2009
C. Ozdalga
Change 13.5mA-max to 15mA-typ (Key Features – Page-1)
Rev 2.0
2/30/2009
C. Ozdalga
Final production version revision number change to Rev 2.0.
Rev 2.1
4/14/2009
C. Ozdalga
Correct Page 7 package pin number typing error.
Rev 2.2
4/22/2009
C. Ozdalga
Page 3 CIN1, CXI/CXOUT pin capacitance changed to 4pF-typ from 6pF-typ.
Rev 2.3
9/1/2009
C. Ozdalga
Replace “floating” with “VDD/2” in table 5 on page 4 and add note under the
same table 5 for clarification. Redo Figure 3 to clarify 3-Level Logic and add 5K
Ω
resistor from SSEL1 to VSS in Figure 4 on page 6. Change Table 1 to Table 5
on pin description table page 2 for SSEL1 and SSEL0 rows.
Rev 2.4
9/3/2009
C. Ozdalga
Replace “floating” with “VDD/2” in table 5 on page 4 under SSEL1.
Rev 2.5
6/4/2010
C. Ozdalga
Add clock input specifications. SL16010DC can be driven by an external crystal
or clock.
Rev 2.6
8/1/2010
C. Ozdalga
Add Halogen Free, page 8.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without
notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences
resulting from the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning
of undescribed features or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon
Laboratories makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does Silicon Laboratories assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Silicon Laboratories products are not designed,
intended, or authorized for use in applications intended to support or sustain life, or for any other application in which the failure of
the Silicon Laboratories product could create a situation where personal injury or death may occur. Should Buyer purchase or use
Silicon Laboratories products for any such unintended or unauthorized application, Buyer shall indemnify and hold Silicon
Laboratories harmless against all claims and damages.
Ordering Number
Marking
Shipping Package
Package
Temperature
SL16010DC
Tube
10-pin TDFN
-10 to 85°C
SL16010DCT
SL16010DC
Tape and Reel
10-pin TDFN
-10 to 85°C