參數資料
型號： SC515847
廠商： Motorola, Inc.
英文描述： Pressure Transducer, Series 19 mm, Compensated, Pressure Range: 0 psi to 100 psi, Gage, 1/4-18 NPT, 10 Vdc excitation
中文描述： MC9S12DT128設備的用戶手冊V02.09
文件頁數： 21/138頁
文件大?。?/td> 2083K
代理商： SC515847
MC9S12DT128 Device User Guide — V02.09
21
–
The Byteflight pin functionality (BF_PSLM, BF_PERR, BF_PROK, BF_PSYN, TX_BF,
RX_BF) is not available on port PM7, PM6, PM5, PM4, PM3 and PM2, if using a derivative
without Byteflight (see
Table 0-1
).
–
Do not write MODRR1 and MODRR0 Bit of Module Routing Register (PIM_9DTB128 Block
User Guide), if using a derivative without CAN0 (see
Table 0-1
).
–
Do not write MODRR3 and MODRR2 Bit of Module Routing Register (PIM_9DTB128 Block
User Guide), if using a derivative without CAN4 (see
Table 0-1
).
Pins not available in 80 pin QFP package for
MC9S12DG128E, MC9S12DG128,
MC9S12DJ128E, and MC9S12DJ128
Port H
In order to avoid floating nodes the ports should be either configured as outputs by setting the
data direction register (DDRH at Base+$0262) to $FF, or enabling the pull resistors by writing
a $FF to the pull enable register (PERH at Base+$0264).
–
–
Port J[1:0]
PortJpull-upresistorsareenabledoutofresetonallfourpins(7:6and1:0).Thereforecaremust
be taken not to disable the pull enables on PJ[1:0] by clearing the bits PERJ1 and PERJ0 at
Base+$026C.
–
Port K
Port K pull-up resistors are enabled out of reset, i.e. Bit 7 = PUKE = 1 in the register PUCR at
Base+$000C. Therefore care must be taken not to clear this bit.
–
Port M[7:6]
PM7:6 must be configured as outputs or their pull resistors must be enabled to avoid floating
inputs.
–
Port P6
PP6 must be configured as output or its pull resistor must be enabled to avoid a floating input.
–
Port S[7:4]
PS7:4 must be configured as outputs or their pull resistors must be enabled to avoid floating
inputs.
–
PAD[15:8] (ATD1 channels)
OutofresettheATD1isdisabledpreventingcurrentflowsinthepins.DonotmodifytheATD1
registers!
Pins not available in 80 pin QFP package for
MC9S12DB128
Port H
In order to avoid floating nodes the ports should be either configured as outputs by setting the
data direction register (DDRH at Base+$0262) to $FF, or enabling the pull resistors by writing
a $FF to the pull enable register (PERH at Base+$0264).
–
–
Port J[7:6, 1:0]
PortJpull-upresistorsareenabledoutofresetonallfourpins(7:6and1:0).Thereforecaremust
be taken not to disable the pull enables on PJ[7:6, 1:0] by clearing the bits PERJ7, PERJ6,
PERJ1 and PERJ0 at Base+$026C.
相關PDF資料
PDF描述
SC515846 Pressure Transducer, Series 19 mm, Compensated, Pressure Range: 0 psi to 100 psi, Gage, 1/8-27 NPT, 10 Vdc excitation
SC515848 MC9S12DT128 Device User Guide V02.09
SC515849 Pressure Transducer, Series 19 mm, Compensated, Pressure Range: 0 psi to 100 psi, Gage, 7/16 UNF, 10 Vdc excitation
SCAN12100 1228.8 and 614.4 Mbps CPRI SerDes with Auto RE Sync and Precision Delay Calibration Measurement
SCAN15MB200 Dual 1.5 Gbps 2:1/1:2 LVDS Mux/Buffer with Pre-Emphasis and IEEE 1149.6
相關代理商/技術參數
參數描述
SC515848 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Device User Guide
SC515849 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:MC9S12DT128 Device User Guide V02.09
SC516/WH 制造商:CQR Security 功能描述:REED AND MAGNET HOUSING
SC51601FBR2 制造商:Motorola Inc 功能描述:
SC51613DWR2 制造商:Motorola Inc 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*