
Revision 1.0 (Confidential)
5
S
5.0 Product Status Definitions
6.0 National Semiconductor B.V reserves the right to make
changes without notice to any products herein to improve
reliability, function or design. National does not assume any
liability arising out of the application or use of any product or
circuit described herein; neither does it convey any license
under its patent rights, nor the right of others.
3.The protection current can be calculated as follows:
In case P1[6]/PON, P1[7]/CHARGE, VBAT3, P2[3]/ADC1 is input,
Iprotxxx_max = (Vext - 2.55)/(500+Rext)
Rext is an external resistor which is needed if the external voltage Vext exceeds the 2.8V.
(A lower protection current value of e.g. 100 uA is recommended in case power saving is important)
In case P1[6]/PON, P1[7]/CHARGE , P2[3]/ADC1 is output, Iprotxxx_max = (VDDIO - 2.55)/(500)
4.For pads with the protection circuit enabled, the protection current
must
be limited with external
source resistor Rext if the input voltage exceeds 0.4V resp 1.4V. Rext can be calculated as follows:
Rext >(Vext-1.4)/Iprotxxx).
5.Within this temperature range full operation is guaranteed.Upto +70 degrees Celsius analog perfor-
mance is not guaranteed.
Datasheet Status
Advance Information
Product Status
Formative or in Design
Definition
This data sheet contains the design specifications for
product development. Specifications may change in any
manner without notice.
This data sheet contains preliminary data. Supplementa-
ry data will be published at a later date. National Semi-
conductor Corporation reserves the right to make
changes at any time without notice in order to improve
design and supply the best possible product.
This data sheet contains final specifications. National
Semiconductor Corporation reserves the right to make
changes at any time without notice in order to improve
design and supply the best possible product.
This data sheet contains specifications on a product that
has been discontinued by National Semiconductor Cor-
poration. The datasheet is printed for reference informa-
tion only.
Preliminary
First Production
No Identification Noted
Full production
Obsolete
Not in Production