參數資料
型號: SAF-XC2387C-200F100L
廠商: INFINEON TECHNOLOGIES AG
元件分類: 微控制器/微處理器
英文描述: 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144
封裝: 0.50 MM PITCH, GREEN, PLASTIC, LQFP-144
文件頁數: 125/147頁
文件大?。?/td> 1798K
代理商: SAF-XC2387C-200F100L
XC2387C, XC2388C
XC2000 Family Derivatives / High Line
Functional Description
Data Sheet
79
V1.2, 2010-09
Clock control, address decoding, and service request control are managed outside the
E-Ray module kernel.
FlexRay Module Features
For communication on a FlexRay network, individual Message Buffers with up to 254
data bytes are configurable. The message storage consists of a single-ported Message
RAM that holds up to 128 Message Buffers. All functions concerning the handling of
messages are implemented in the Message Handler. Those functions are the
acceptance filtering, the transfer of messages between the two FlexRay Channel
Protocol Controllers and the Message RAM, maintaining the transmission schedule as
well as providing message status information.
The register set of the E-Ray IP-module can be accessed directly by an external Host
via the module’s Host interface. These registers are used to control/configure/monitor
the FlexRay Channel Protocol Controllers, Message Handler, Global Time Unit,
System Universal Control, Frame and Symbol Processing, Network Management,
Service Request Control, and to access the Message RAM via Input / Output Buffer.
The E-Ray IP-module supports the following features:
Conformance with FlexRay protocol specification V2.1
Data rates of up to 10 Mbit/s on each channel
Up to 128 Message Buffers configurable
8 Kbytes of Message RAM for storage of e.g. 128 Message Buffers with max.
48 bytes data field or up to 30 Message Buffers with 254 bytes Data Sections
Configuration of Message Buffers with different payload lengths possible
One configurable receive FIFO
Each Message Buffer can be configured as receive buffer, as transmit buffer or as
part of the receive FIFO
Host access to Message Buffers via Input and Output Buffer.
Input Buffer: Holds message to be transferred to the Message RAM
Output Buffer: Holds message read from the Message RAM
Filtering for slot counter, cycle counter, and channel
Maskable module service requests
Network Management supported
Four service request lines
Automatic delayed read access to Output Command Request Register (OBCR) if a
data transfer from Message RAM to Output Shadow Buffer (initiated by a previous
write access to the OBCR) is ongoing.
Automatic delayed read access to Input Command Request Register (IBCR) if a data
transfer from Input Shadow Buffer to Message RAM to (initiated by a previous write
access to the IBCR) is ongoing.
Four Input Buffers for building up transmission Frames in parallel.
Flag indicating which Input Buffer is currently accessible by the host.
相關PDF資料
PDF描述
SAF-XC2387C-136F100L 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144
SAF-XC2388C-200F100L 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144
SAF-XC2388C-200F80L 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP144
SAK-XC2388C-200F80L 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP144
SAF-XC2388C-104F100L 32-BIT, FLASH, 100 MHz, RISC MICROCONTROLLER, PQFP144
相關代理商/技術參數
參數描述
SAF-XC2766X-96F66L66 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16/32-Bit Single-Chip Microcontroller with 32-Bit Performance
SAF-XC2786X-96F66L 制造商:Infineon Technologies AG 功能描述:
SAF-XC822-1FRA 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:8-Bit Single-Chip Microcontroller
SAF-XC822-1FRA AA 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
SAF-XC822-1FRI 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:8-Bit Single-Chip Microcontroller