參數資料
型號: SAA-XC886LM-6FFA5V
廠商: INFINEON TECHNOLOGIES AG
元件分類: 微控制器/微處理器
英文描述: 8-BIT, FLASH, 96 MHz, MICROCONTROLLER, PQFP48
封裝: GREEN, PLASTIC, TQFP-48
文件頁數: 9/134頁
文件大?。?/td> 4390K
代理商: SAA-XC886LM-6FFA5V
SAA-XC886CLM
Functional Description
Data Sheet
99
V1.1, 2010-08
3.22
On-Chip Debug Support
The On-Chip Debug Support (OCDS) provides the basic functionality required for the
software development and debugging of XC800-based systems.
The OCDS design is based on these principles:
Use the built-in debug functionality of the XC800 Core
Add a minimum of hardware overhead
Provide support for most of the operations by a Monitor Program
Use standard interfaces to communicate with the Host (a Debugger)
Features
Set breakpoints on instruction address and on address range within the Program
Memory
Set breakpoints on internal RAM address range
Support unlimited software breakpoints in Flash/RAM code region
Process external breaks via JTAG and upon activating a dedicated pin
Step through the program code
The OCDS functional blocks are shown in Figure 36. The Monitor Mode Control (MMC)
block at the center of OCDS system brings together control signals and supports the
overall functionality. The MMC communicates with the XC800 Core, primarily via the
Debug Interface, and also receives reset and clock signals.
After processing memory address and control signals from the core, the MMC provides
proper access to the dedicated extra-memories: a Monitor ROM (holding the code) and
a Monitor RAM (for work-data and Monitor-stack).
The OCDS system is accessed through the JTAG
1), which is an interface dedicated
exclusively for testing and debugging activities and is not normally used in an
application. The dedicated MBC pin is used for external configuration and debugging
control.
Note: All the debug functionality described here can normally be used only after SAA-
XC886 has been started in OCDS mode.
1) The pins of the JTAG port can be assigned to either the primary port (Port 0) or either of the secondary ports
(Ports 1 and 2/Port 5).
User must set the JTAG pins (TCK and TDI) as input during connection with the OCDS system.
相關PDF資料
PDF描述
SAA5296PS/NNN 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PDIP52
SAA5497PS/NNN 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PDIP52
SAA5491H/NNN 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
SAA5532PS/NNNN 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PDIP52
SAA5551PS/NNNN 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
SAA-XC886LM-8FFA 5V AC 功能描述:8位微控制器 -MCU 8-Bit Single Chip Microcontroller RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
SAA-XC886LM-8FFA5V 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:8-Bit Single Chip Microcontroller
SAB 制造商:SEMIKRON 制造商全稱:Semikron International 功能描述:Surface mount diode
SAB 4-G 制造商:Multi-Contact 功能描述:
SAB 6922 AU / GN 制造商:Gerhard Sch?tzinger Labor-Sch?tz GmbH 功能描述: