參數資料
型號： S29GL032M10TCCR62
廠商： Spansion Inc.
英文描述： MirrorBit Flash Family
中文描述： MirrorBit閃存系列
文件頁數： 15/159頁
文件大?。?/td> 5216K
代理商： S29GL032M10TCCR62
Octorber 18, 2004 S29GLxxxM_00_B3
S29GLxxxM MirrorBitTM Flash Family
111
Da tash eet
l
Figure 6. Erase Operation
Erase Suspend/Erase Resume Commands
The Erase Suspend command, B0h, allows the system to interrupt a sector erase operation and then read data
from, or program data to, any sector not selected for erasure. This command is valid only during the sector erase
operation, including the 50 s time-out period during the sector erase command sequence. The Erase Suspend
command is ignored if written during the chip erase operation or Embedded Program algorithm.
When the Erase Suspend command is written during the sector erase operation, the device requires a typical of
5 s (maximum of 20 s) to suspend the erase operation. However, when the Erase Suspend command is written
during the sector erase time-out, the device immediately terminates the time-out period and suspends the erase
operation.
After the erase operation is suspended, the device enters the erase-suspend-read mode. The system can read
data from or program data to any sector not selected for erasure. (The device “erase suspends” all sectors se-
lected for erasure.) Reading at any address within erase-suspended sectors produces status information on DQ7–
DQ0. The system can use DQ7, or DQ6 and DQ2 together, to determine if a sector is actively erasing or is erase-
suspended. Refer to the Write Operation Status section for information on these status bits.
After an erase-suspended program operation is complete, the device returns to the erase-suspend-read mode.
The system can determine the status of the program operation using the DQ7 or DQ6 status bits, just as in the
standard word program operation. Refer to the Write Operation Status section for more information.
In the erase-suspend-read mode, the system can also issue the autoselect command sequence. Refer to the “Au-
START
Write Erase
Command Sequence
(Notes 1, 2)
Data Poll to Erasing
Bank from System
Data = FFh?
No
Yes
Erasure Completed
Embedded
Erase
algorithm
in progress
Notes:
page 114 for program command sequence.
2. See the section on DQ3 for information on the sector
erase timer.
相關PDF資料
PDF描述
S29GL032M10TCCR63 MirrorBit Flash Family
S29GL032M10TFCR00 MirrorBit Flash Family
S29GL032M10TFCR02 MirrorBit Flash Family
S29GL032M10TFCR03 MirrorBit Flash Family
S29GL032M10TFCR10 CAP 15PF 100V 5% NP0(C0G) SMD-0805 TR-7-PL SN-NIBAR
相關代理商/技術參數
參數描述
S29GL032M10TCCR63 制造商:SPANSION 制造商全稱:SPANSION 功能描述:MirrorBit Flash Family
S29GL032M10TCIR00 制造商:SPANSION 制造商全稱:SPANSION 功能描述:MirrorBit Flash Family
S29GL032M10TCIR02 制造商:SPANSION 制造商全稱:SPANSION 功能描述:256,128,64,32,Megabit 3.0 Volt-only Page Mode Flash Memory featuring 0.23 レm MirrorBit Process Technology
S29GL032M10TCIR03 制造商:SPANSION 制造商全稱:SPANSION 功能描述:MirrorBit Flash Family
S29GL032M10TCIR10 制造商:SPANSION 制造商全稱:SPANSION 功能描述:3.0 Volt-only Page Mode Flash Memory featuring 0.23 um MirrorBit process technology
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*