參數資料
型號： S25FL002D0FMFI011
廠商： SPANSION LLC
元件分類： DRAM
英文描述： 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
中文描述： 2M X 1 SPI BUS SERIAL EEPROM, PDSO8
封裝： 0.208 INCH, LEAD FREE, PLASTIC, SO-8
文件頁數： 22/38頁
文件大小： 892K
代理商： S25FL002D0FMFI011
22
S25FL Family (Serial Peripheral Interface)
30167A+1 June 9, 2004
P r e l i m i n a r y I n f o r m a t i o n
Figure 13. Bulk Erase (BE) Instruction Sequence
Software Protect (SP)
The Software Protect (SP) instruction implemented in this device is compatible
with industry-standard Software Protect (SP) operation. For this device, this in-
struction has no real function since the Standby Current (I
SB
) on this device is
the same as the Deep Power-down Current in our competitor's devices.
It is recommended that the standard Standby mode be used for the lowest power
current draw, as well as the Software Protect (SP) as an extra software protection
mechanism when this device is not in active use. In this mode, the device ignores
all Write, Program and Erase instructions. Chip Select (CS#) must be driven Low
for the entire duration of the sequence.
The Software Protect (SP) instruction is entered by driving Chip Select (CS#)
Low, followed by the instruction code on Serial Data Input (SI). Chip Select (CS#)
must be driven Low for the entire duration of the sequence.
The instruction sequence is shown in
Figure 14
.
Driving Chip Select (CS#) High after the eighth bit of the instruction code has
been latched in deselects the device, and puts the device in the Standby mode (if
there is no internal cycle currently in progress). As soon as Chip Select (CS#) is
driven high, it requires a delay of t
SP
currently in progress before Software Pro-
tect mode is entered.
Once the device has entered the Software Protect mode, all instructions are ig-
nored except the Release from Software Protect (RES) or Read ID (READ_ID)
instruction. The Release from Software Protect and Read Electronic Signature
(RES) instruction also allows the Electronic Signature of the device to be output
on Serial Data Output (SO).
The Software Protect mode automatically stops at Power-down, and the device
always Powers-up in the Standby mode.
0
1
2
4
5
6
7
Instruction
CS#
SCK
SI
3
相關PDF資料
PDF描述
S25FL002D0FMFI013 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI001 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI003 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI011 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI013 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
相關代理商/技術參數
參數描述
S25FL002D0FMFI013 制造商:SPANSION 制造商全稱:SPANSION 功能描述:2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI001 制造商:SPANSION 制造商全稱:SPANSION 功能描述:2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI003 制造商:SPANSION 制造商全稱:SPANSION 功能描述:2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI011 制造商:SPANSION 制造商全稱:SPANSION 功能描述:2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
S25FL002D0FNAI013 制造商:SPANSION 制造商全稱:SPANSION 功能描述:2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*