- 您現在的位置：買賣IC網 > PDF目錄384893 > S217R (Minmax Technology Co., Ltd.) 2W, Low Cost DIP, Single & Dual Output DC/DC Converters PDF資料下載
參數資料
| 型號： | S217R |
| 廠商： | Minmax Technology Co., Ltd. |
| 英文描述： | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
| 中文描述： | 2W的，低成本下跌，單 |
| 文件頁數： | 5/6頁 |
| 文件大?。?/td> | 237K |
| 代理商： | S217R |
Test Configurations
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with a inductor
Lin (4.7uH) and Cin (220uF, ESR < 1.0[ at 100 KHz) to
simulate source impedance.
Capacitor Cin, offsets possible battery impedance.
Current ripple is measured at the input terminals of the
module, measurement bandwidth is 0-500 KHz.
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33uF ceramic capacitor.
Scope measurement should be made by using a BNC
socket, measurement bandwidth is 0-20 MHz. Position the
load between 50 mm and 75 mm from the DC/DC Converter.
Design & Feature Considerations
Maximum Capacitive Load
The S200R series has limitation of maximum connected
capacitance at the output.
The power module may be operated in current limiting
mode during start-up, affecting the ramp-up and the startup
time.
For optimum performance we recommend 220uF
maximum capacitive load
for dual outputs and 470
u
F
capacitive load
for single outputs.
The maximum capacitance can be found in the data sheet.
Input Source Impedance
The power module should be connected to a low
ac-impedance input source. Highly inductive source
impedances can affect the stability of the power module.
In applications where power is supplied over long lines and
output loading is high, it may be necessary to use a capacitor
at the input to ensure startup.
Capacitor mounted close to the power module helps
ensure stability of the unit, it is recommended to use a good
quality low Equivalent Series Resistance (ESR < 1.0[ at 100
KHz) capacitor of a 2.2uF for the 5V input devices, a 1.0uF for
the 12V input devices and a 0.47uF for the 24V and 48V
devices.
Output Ripple Reduction
A good quality low ESR capacitor placed as close as
practicable across the load will give the best ripple and noise
performance.
To reduce output ripple, it is recommended to use 1.5uF
capacitors at the output.
Thermal Considerations
Many conditions affect the thermal performance of the
power module, such as orientation, airflow over the module
and board spacing. To avoid exceeding the maximum
temperature rating of the components inside the power
module, the case temperature must be kept below 90°C.
The derating curves are determined from measurements
obtained in an experimental apparatus.
S200R Series
REV:0 2005/04
MINMAX
5
+Out
-Out
+Vin
-Vin
DC / DC
Converter
Load
Battery
+
Lin
+
Cin
To Oscilloscope
Current
Probe
+Out
-Out
+Vin
-Vin
Dual Output
DC / DC
Converter
Resistive
Load
Scope
Copper Strip
Cout
Com.
Scope
Cout
+Out
-Out
+Vin
-Vin
Single Output
DC / DC
Converter
Resistive
Load
Scope
Copper Strip
Cout
+
+Out
-Out
+Vin
-Vin
DC / DC
Converter
Load
DC Power
Source
+
-
Cin
+Out
-Out
+Vin
-Vin
Load
DC Power
Source
+
-
Cout
Com.
Dual Output
DC / DC
Converter
+Out
-Out
+Vin
-Vin
Load
DC Power
Source
+
-
Cout
Single Output
DC / DC
Converter
DUT
Position of air velocity
probe and thermocouple
50mm / 2in
Air Flow
15mm / 0.6in
相關PDF資料 |
PDF描述 |
|---|---|
| S218R | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
| S219R | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
| S220R | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
| S200R | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
| S201R | 2W, Low Cost DIP, Single & Dual Output DC/DC Converters |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S218 | 功能描述:固態繼電器-工業安裝 8A 120VAC .187QC RoHS:否 制造商:Crydom 控制電壓范圍:4 VDC to 32 VDC 負載電壓額定值:7 VDC to 72 VDC 負載電流額定值:160 A 觸點形式: 輸出設備:SSR 安裝風格:Panel |
| S218 HDG | 制造商:Thomas & Betts 功能描述:SSTRUT FITTINGS/BRACKETS |
| S2180 | 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 800V 22A 2PIN DO-203AA - Bulk |
| S218025T-26.000-X-R | 制造商:Aker Technology Company Ltd 功能描述:S2 Series 2.5x2mm 2.5 V 26 Mhz -40+85 C SMD Oscillator |
| S21805-10.000-X | 制造商:Aker 功能描述:XO SMD 1.8V 10.000MHz 2x2.5mm |
發布緊急采購，3分鐘左右您將得到回復。