
J–27
J
S
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
C&K S Series
Slide Switches
Models Available
Features/Benefits
 6 to 15 AMPS
 Enclosed housing
 PC and Snap-in panel mounting
 Reversing option
 RoHS compliant
Typical Applications
 Portable tools
 Small appliances
 Floor care products
Specifications
CONTACT RATING: Q contact material (S1XX, S2XX Models):
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @
125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).
(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @
250 V AC (UL/CSA). See page J-31 for additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m 
 typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109
 min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30oC to +65oC
STORAGE TEMPERATURE: -30oC to +85oC
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J–28 through J–31. For additional options not shown in catalog, consult Customer Service Center.
Materials
HOUSING: 6/6 nylon (UL94V-2), black.
TOP PLATE: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
J-31 for additional contact materials.
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE:
 Any models supplied with Q, B or G contact material are RoHS compliant. 
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE:
 Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Switch Function
S101
 SPST, 6 AMPS
S202
 (DPDT, 6 AMPS
S802
 DPDT, 15 AMPS
S102
 SPDT, 6AMPS
S112
 SPDT, mom., 6 AMPS
S201
 DPST, 6 AMPS
S602
 DPDT, 12 AMPS
S701
 SPST, 15 AMPS
S702
 SPDT, 15 AMPS
Mounting Style
SS
 Panel with mounting ears
MS
 PC thru-hole
S2
 Snap-in panel with blacktop plate
TS
 Panel with mounting ears
Detent
1
With detent
2
Without detent
Actuator
03
 .335" high
04
 .500" high
09
 .250" high
12
 Screwdriver slot
(with marking)
13
 Screwdriver slot
(without marking)
C2
 Black cap
C3
 Red cap
C5
 Yellow cap
Contact Material
Q
 Silver
B
 Gold
G
 Gold over silver
Seal
NONE
 No seal
E
 Epoxy seal
Housing Markings
NONE 
No markings
D
 ON-OFF
L
ON
M
 ON-OFF
N
 Red rectangle on one end
Terminations
03
 Solder lug with hole
02
 PC Thru-hole
04
 PC Thru-hole
07
 Quick connect
08
 PC Thru-hole
WC
 Wire lead