RP101x S ERIES
LOW NOISE 300mA LDO REGULATOR
NO.EA-167-070903
OUTLINE
1
The RP101x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the RP101x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and
PLP1612-4 (t=0.6mm type) or PLP1612-4B (t=0.4mm type), therefore high density mounting of the ICs on
boards is possible.
FEATURES
Supply Current .............................................................Typ. 18
μ
A
Standby Current ...........................................................Typ. 0.1
μ
A
Dropout Voltage............................................................Typ. 0.13V (I
OUT
=
150mA, V
OUT
=
2.8V)
Ripple Rejection...........................................................Typ. 75dB (f
=
1kHz)
Temperature-Drift Coefficient of Output Voltage ..........Typ.
±
30ppm/
°
C
Line Regulation ............................................................Typ. 0.02%/V
Output Voltage Accuracy..............................................
±
0.8%
Packages......................................................................PLP1612-4, PLP1612-4B, SOT-23-5
Input Voltage Range.....................................................1.7V to 5.25V
Output Voltage..............................................................1.2V, 1.3V, 1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.1V, 2.5V,
2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V, 3.3V
Built-in Fold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC .... 1.0
μ
F or more
APPLICATIONS
Power source for portable communication equipment.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
Power source for home appliances.