
RP100x S ERIES  
LOW NOISE 200mA LDO REGULATOR 
NO.EA-140-070831 
OUTLINE 
1 
The RP100x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low 
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference 
unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. 
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load 
transient response of the RP100x Series are excellent, thus these ICs are very suitable for the power supply for 
hand-held communication equipment. 
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 
and PLP1612-4, therefore high density mounting of the ICs on boards is possible. 
FEATURES 
 
Supply Current......................................................Typ. 18
μ
A  
 
Standby Current....................................................Typ. 0.1
μ
A 
 
Dropout Voltage ....................................................Typ. 0.13V (I
OUT
=
150mA, V
OUT
=
2.8V) 
 
Ripple Rejection....................................................Typ. 75dB (f
=
1kHz) 
 
Temperature-Drift Coefficient of Output Voltage...Typ. 
±
30ppm/
°
C 
 
Line Regulation.....................................................Typ. 0.02%/V 
 
Output Voltage Accuracy.......................................
±
0.8% 
 
Packages ..............................................................PLP1612-4, SOT-23-5 
 
Input Voltage Range .............................................1.7V to 5.25V 
 
Output Voltage ......................................................1.2V, 1.3V, 1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.1V, 2.5V, 
2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V, 3.3V 
 
Built-in Fold Back Protection Circuit .....................Typ. 40mA (Current at short mode) 
 
Ceramic capacitors are recommended to be used with this IC.....1.0
μ
F or more 
APPLICATIONS 
 
Power source for portable communication equipment. 
 
Power source for electrical appliances such as cameras, VCRs and camcorders. 
 
Power source for battery-powered equipment.