參數資料
型號: RF9958
廠商: RF MICRO DEVICES INC
元件分類: 無繩電話/電話
英文描述: CDMA/FM TRANSMIT MODULATOR, IF AGC, AND UPCONVERTER
中文描述: TELECOM, CELLULAR, RF AND BASEBAND CIRCUIT, PDSO28
封裝: QSOP-28
文件頁數: 5/12頁
文件大?。?/td> 129K
代理商: RF9958
5-97
RF9958
Rev B11 010720
5
M
U
Pin
10
Function
BG OUT
Description
Bandgap voltage reference. This voltage, constant over temperature
and supply variation, is used to bias internal circuits. A 1nF external
bypass capacitor is required.
Supply voltage for the AGC and the Bandgap circuitry. A 1nF external
bypass capacitor is required and an additional 0.1
μ
F will be required if
no other low frequency bypass capacitors are nearby. The trace length
between the pin and the bypass capacitors should be minimized. The
ground side of the bypass capacitors should connect immediately to
ground plane.
Same as pin 6.
Interface Schematic
11
VCC3
12
13
GND1
PD1
Power down control for overall circuit. When logic “high” (
V
CC
-0.7V),
all circuits are operating; when logic “l(fā)ow” (
0.5V), all circuits are
turned off. The input impedance of this pin is >10k
. A DC voltage less
than or equal to the maximum allowable Vcc may be applied to this pin
when no voltage is applied to the Vcc pins.
14
VCC4
Supply for the mixer stage only. The supply for the mixer is separated to
maximize IF to RF isolations and reduce the carrier leakage. A 100pF
external bypass capacitor is required and an additional 0.1
μ
F will be
required if no other low frequency bypass capacitors are nearby. The
trace length between the pin and the bypass capacitors should be min-
imized. The ground side of the bypass capacitors should connect
immediately to ground plane.
Power down control for mixer only. When connected to pin 10 (BG
OUT) the mixer circuits are operating; when connected to ground
(
0.5V), the mixer is turned off but all other circuits are operating. A DC
voltage less than or equal to the maximum allowable Vcc may be
applied to this pin when no voltage is applied to the Vcc pins.
15
PD2
16
GND2
Ground connection for the mixer stage. Keep traces physically short
and connect immediately to ground plane for best performance.
RF output pin. An external shunt inductor to V
CC
plus a series blocking/
matching capacitor are required for 50
output.
17
RF OUT
18
DEC
Current Mirror decoupling pin. A 1000pF external capacitor is required
to bypass this pin. The ground side of the bypass capacitors should
connect immediately to ground plane.
One half of the balanced mixer LO2 input. In single-ended applications,
the other half of the input, LO2- is AC grounded. This is a 50
imped-
ance port. This pin is NOT internally DC blocked. An external blocking
capacitor (100pF recommended) must be provided if the pin is con-
nected to a device with DC present.
19
LO2+
20
LO2-
One half of the balance mixer LO2 input. In single ended applications,
this pin is AC grounded with a 100pF capacitor.
One half of the 200
balanced impedance input to the mixer stage.
This pin is NOT internally DC blocked. An external blocking capacitor
(2200pF recommended) must be provided if the pin is connected to a
device with DC present. If no IF filter is needed this pin may be con-
nected to MOD OUT+ through a DC blocking capacitor. An appropriate
matching network may be needed if an IF filter is used.
See pin 19.
21
MIX IN-
10 k
PD1
1 k
PD2
450
300
V
CC4
RF OUT
40
BIAS
40
BIAS
LO2+
LO2-
100
BIAS
100
BIAS
MIX IN-
MIX IN+
相關PDF資料
PDF描述
RF9958PCBA CDMA/FM TRANSMIT MODULATOR, IF AGC, AND UPCONVERTER
RF9986 PCS LOW NOISE AMPLIFIER/MIXER
RF9986PCBA PCS LOW NOISE AMPLIFIER/MIXER
RFD10P03 10A, 30V, 0.200W, Logic Level P-Channel Power MOSFET
RFD10P03L 10A, 30V, 0.200W, Logic Level P-Channel Power MOSFET
相關代理商/技術參數
參數描述
RF9958PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:CDMA/FM TRANSMIT MODULATOR, IF AGC, AND UPCONVERTER
RF-9980P 制造商: 功能描述: 制造商:undefined 功能描述:
RF9986 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:PCS LOW NOISE AMPLIFIER/MIXER
RF9986PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:PCS LOW NOISE AMPLIFIER/MIXER
RFA 4001-636-211-401 制造商:Novotechnik 功能描述: