參數資料
型號： RF2498
廠商： RF MICRO DEVICES INC
元件分類： 無繩電話/電話
英文描述： TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
中文描述： TELECOM, CELLULAR, RF AND BASEBAND CIRCUIT, PQCC32
封裝： 5 X 5 MM, PLASTIC, QFN-32
文件頁數： 11/20頁
文件大小： 723K
代理商： RF2498
8-311
RF2498
Rev A3 030711
ISET Pins
ISET1 sets the internal reference voltage for the bias control circuits to all functional blocks. An external resistor of 5.1k
to ground is required. We do not recommend adjusting this resistor value. This resistor is pulled out to allow for a higher
precision off chip value and not as a significant tuning adjustment.
ISET2 sets the DC current through the LNAs in all bands when IPSET is high. Higher resistance to ground results in
lower current through the LNA. Increasing the LNA current will improve the IIP3 of the LNA and slightly increase gain in
all modes. NF typically will get worse as you increase current. Increasing the LNA current in one mode, i.e. Cellular, will
also increase the LNA current for the high IPSET state for PCS and the GPS LNAs as well.
ISET3 sets the DC current through the mixer and mixer preamplifier for all bands. Higher resistance to ground results in
lower current. Lower current will improve mixer NF but will degrade IIP3. Mixer and the mixer preamp gain is not signifi-
cantly changed with current.
Pin
28
Function
GPS MIX IN
Type Description
AI
GPS mixer RF single-end input.
Interface Schematic
29
VCC1
P
DC supply for internal reference, logic control, cellular mixer
preamp, and GPS mixer preamp (PCS mixer preamp has its’
own DC supply, PCS_RFA_VCC). External bypass capacitor
between 1nF and 47nF required.
Resistor for internal voltage reference setting. Recommended
value 5.1k
.
Resistor to ground sets the LNA current in boost mode (all
three LNAs). Higher resistance results in lower current.
Resistor to ground sets preamp and mixer currents in all
bands. Higher resistance results in lower currents.
Ground connection. The backside of the package should be
soldered to a top side ground pad which is connected to the
ground plane with multiple vias.
30
ISET1
AO
31
ISET2
AO
32
ISET3
AO
Pkg
Base
GND
P
Legend:
DI=Digital Input from Baseband Chip
AI=Analog Input
AO=Analog Output
P=V
CC
or GND
GPS MIX IN
相關PDF資料
PDF描述
RF2498PCBA TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
RF2690 W-CDMA RECEIVE AGC AND DEMODULATOR
RF2870 CDMA LOW NOISE AMPLIFIER/MIXER 900MHz DOWNCONVERTER
RF2870PCBA CDMA LOW NOISE AMPLIFIER/MIXER 900MHz DOWNCONVERTER
RF2890 DUAL-BAND CDMA CELLULAR/GPS LOW NOISE AMPLIFIER/MIXER
相關代理商/技術參數
參數描述
RF2498_07 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
RF2498_1 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
RF2498-000 制造商:TE Connectivity 功能描述:POLYZEN - Tape and Reel 制造商:TE Connectivity 功能描述:POLYZEN - Cut TR (SOS) 制造商:TE Connectivity 功能描述:TVS POLYZEN SMD 制造商:TE Connectivity / Raychem 功能描述:TVS POLYZEN SMD
RF2498PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
RF2498PCBA-41X 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:TRI-BAND/QUAD-MODE CDMA/GPS LOW NOISE AMPLIFIER/MIXER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*