- 您現在的位置：買賣IC網 > PDF目錄384883 > RF2127PCBA (RF Micro Devices, Inc.) MEDIUM POWER LINEAR AMPLIFIER PDF資料下載
參數資料
| 型號： | RF2127PCBA |
| 廠商： | RF Micro Devices, Inc. |
| 英文描述： | MEDIUM POWER LINEAR AMPLIFIER |
| 中文描述： | 中功率線性放大器 |
| 文件頁數： | 3/6頁 |
| 文件大?。?/td> | 63K |
| 代理商： | RF2127PCBA |
2-81
RF2127
Rev A3 010720
2
P
Pin
1
Function
VCC2
Description
Power supply for the driver stage and interstage matching. Matching is
typically done by a microstrip line to V
CC
that is RF grounded at the
V
CC
side. See the application information for details.
Ground connection for the driver stage. Keep traces physically short
and connect immediately to the ground plane for best performance.
This connection should be separated from the ground connection for
the output stage, i.e., using separate traces and vias.
Power Down control. When this pin is "low", all circuits are shut off. A
"low" is typically 1.2V or less at room temperature. When this pin is
"high", all circuits are operating normally. A "high" is V
CC
. If V
PD
is
below V
CC
, output power and performance will be degraded. This could
be used to obtain some gain control, but results are not guaranteed.
RF Input. This is a 50
input, but the actual impedance depends on
the matching provided on pin 1. An external DC blocking capacitor is
required if this port is connected to a DC path to ground.
Ground connection for the output stage. Keep traces physically short
and connect immediately to the ground plane for best performance.
This connection should be separated from the ground connection for
the driver stage, i.e., using separate traces and vias.
RF Output and power supply for the output stage. Bias for the output
stage needs to be provided on this pin. This can be done through a
quarter-wave microstrip that is RF grounded on the other end. For
matching to 50
, an external series microstrip line is required.
Same as pin 6.
Interface Schematic
2
GND1
3
PD
4
RF IN
5
GND2
6
RF OUT
7
8
RF OUT
VCC1
Power supply for the bias circuits. An external RF bypass capacitor of
22 pF is required. Keep the traces to the capacitor as short as possible,
and connect the capacitor immediately to the ground plane.
相關PDF資料 |
PDF描述 |
|---|---|
| RF2128 | MEDIUM POWER LINEAR AMPLIFIER |
| RF2128PCBA | MEDIUM POWER LINEAR AMPLIFIER |
| RF2129 | 3V, 2.5GHZ LINEAR POWER AMPLIFIER |
| RF2129PCBA | 3V, 2.5GHZ LINEAR POWER AMPLIFIER |
| RF2131 | HIGH EFFICIENCY AMPS/ETACS AMPLIFIER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| RF2128 | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:MEDIUM POWER LINEAR AMPLIFIER |
| RF2128P | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:MEDIUM POWER LINEAR AMPLIFIER |
| RF2128PCBA | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:MEDIUM POWER LINEAR AMPLIFIER |
| RF2128PPCBA | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:MEDIUM POWER LINEAR AMPLIFIER |
| RF2129 | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:3V, 2.5GHZ LINEAR POWER AMPLIFIER |
發布緊急采購，3分鐘左右您將得到回復。