- 您現在的位置：買賣IC網 > PDF目錄383783 > PS9115-V-F4 (NEC Corp.) HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER PDF資料下載
參數資料
| 型號： | PS9115-V-F4 |
| 廠商： | NEC Corp. |
| 英文描述： | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
| 中文描述： | 高CMR，10 Mbps的圖騰柱輸出型5腳SOP光耦合器 |
| 文件頁數： | 9/12頁 |
| 文件大?。?/td> | 251K |
| 代理商： | PS9115-V-F4 |
PS9115
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature
Time of peak reflow temperature
Time of temperature higher than 220
°
C
Time to preheat temperature from 120 to 180
°
C
Number of reflows
Flux
260
°
C or below (package surface temperature)
10 seconds or less
60 seconds or less
120
±
30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220C
180C
P
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260C MAX.
120C
(2) Wave soldering
Temperature
Time
Preheating conditions
Number of times
Flux
260
°
C or below (molten solder temperature)
10 seconds or less
120
°
C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
Peak Temperature (lead part temperature)
Time (each pins)
Flux
350
°
C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100
°
C
Data Sheet PN10267EJ02V0DS
9
相關PDF資料 |
PDF描述 |
|---|---|
| PS9115-V-F3 | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
| PS9115 | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
| PS9115-F3 | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
| PS9115-F4 | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
| PS9115-V | HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PS9115-V-F4-A | 制造商:NEC 制造商全稱:NEC 功能描述:HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP (SO-5) PHOTOCOUPLER |
| PS9115-V-F4-AX | 制造商:NEC 制造商全稱:NEC 功能描述:HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP (SO-5) PHOTOCOUPLER |
| PS9117 | 制造商:NEC 制造商全稱:NEC 功能描述:NECs HIGH CMR, 10Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP OPTOCOUPLER |
| PS9117A | 制造商:NEC 制造商全稱:NEC 功能描述:HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP (SO-5) HIGH-SPEED PHOTOCOUPLER |
| PS9117-A | 功能描述:高速光耦合器 10Mbps H-Spd Digital RoHS:否 制造商:Avago Technologies 電流傳遞比: 最大波特率: 最大正向二極管電壓:1.75 V 最大反向二極管電壓:5 V 最大功率耗散:40 mW 最大工作溫度:+125 C 最小工作溫度:- 40 C 封裝 / 箱體:SOIC-5 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。