
International Safety Standard Approvals
UL478 Reg. File No. E131987
CSA C22.2 No. 143 and No. 154 Reg. File No. LR59996/LR101320
GENERAL SPECIFICATIONS
Efficiency
40% typical
Isolation voltage
2500VAC
Switching frequency
Linear
Approvals and
Safety
CSA C22.2-143/-154
standards
UL478
Case material
Non-conductive
black plastic
Weight
340g (12oz)
MTBF
See Note 2
710,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating amb.
–25°C to +71°C
Non-operating amb.
–25°C to +85°C
Derating, 50°C to 71°C
2.5%/°C
Cooling
Free-air convection cooled
Relative Humidity
Non-condensing
20% to 95% RH
Vibration
Encapsulated
OUTPUT SPECIFICATIONS
Voltage accuracy
±1.0% max.
Line regulation
±0.02%
Load regulation
±0.02%
Temperature coefficient
±0.02%/°C
Output power limit
Typical
130% to 200% FL
Short circuit protection
Switch off/on
100% to 200% FL
INPUT SPECIFICATIONS
Input voltage range
220±20VAC
Input frequency range
47Hz to 400Hz
Safety ground
Less than 3.5mA
leakage current
@ 50Hz
PM563D SERIES
Single output
[ 2 YEAR WARRANTY ]
Split bobbin wound
PCB mounting
UL and CSA approved
220VAC input
Short circuit protection
This encapsulated, sub-miniature PC-mountable linear power module comprises
of 1 single output model for a wide variety of printed circuit board applications.
For maximum safety, all power transformers are split bobbin wound, rather than
layer wound, to give total isolation with low coupling capacitance between
primary and secondary. Conservative design and rating of these modules results
in reliable operation and long life. Standard input voltage is 220VAC. This sub-
miniature module is ideal for lower power applications where minimum circuit
board space is available.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
PAGE 1