參數資料
型號： PL-2507
英文描述： PL-2507 USB 2.0 to IDE Bridge Controller Product Datasheet v1.3|Doc - Data Sheet?-- ?PL-2507 Hi-Speed USB 2.0 to IDE Bridge Controller
中文描述： 特等- 2507的USB 2.0 IDE橋接控制器產品數據表v1.3標準|文件-數據表？ - ？特等- 2507高速USB 2.0 IDE橋接控制器
文件頁數： 6/19頁
文件大小： 190K
代理商： PL-2507
Release Date
August 2003
ds_pl2507_v13
PL-2507 Product Datasheet
- 14 -
Document Version 1.3
6.2.2 Get Max LUN
The device may implement several logical units that share common device characteristics. The host
uses bCBWLUN (see 5.1 Command Block Wrapper (CBW)) to designate which logical unit of the
device is the destination of the CBW. The Get Max LUN device request is used to determine the
number of logical units supported by the device. Logical Unit Numbers on the device shall be
numbered contiguously starting from LUN 0 to a maximum LUN of 15 (Fh).
6.3 Vender Specific Requests
Command
bmType
bRequest
wValue
wIndex
wLength
Data
Note
SET_EEPROM_STR
0x41
0x05
0
BL
Data String
GET_EEPROM_STR
0xC1
0x06
0
BL
Data String
Note: The BL shall not exceed 255, the requests will be stalled otherwise.
6.3.1 SET_EEPROM_STRING Request
The PL-2507 supports the option to store the Vendor ID, Product ID, and Device Release Number in
device descriptor, Attributes and Max Power setting in configuration descriptor, and Strings of String
Descriptor in an external Serial EEPROM.
The PL-2507 will detect the existence of the EEPROM
automatically after reset.
If the first word retrieved from the EEPROM matches the predefined check
byte, 0x067B, it would use the data from this external EEPROM instead of the data from internal
ROM.
The vendor specific SET_EEPROM_STRING request is used to change the contents of the EEPROM.
The data part of this request is written to the EEPROM from address 0 all the way up to address 255.
Therefore, it is necessary for the software to prepare the whole table first and then write it to the
EEPROM in one single SET_EEPROM_STRING request.
6.3.2 GET_EEPROM_STRING Request
This request allows driver on host side retrieve the whole data table resides in the external serial
EEPROM. The returned data is retrieved starting from address 0 to the end of data table from
EEPROM. It is mostly used as a verification method to check the data integrity of the previous write.
相關PDF資料
PDF描述
PL-2519 PL-2519 Hi-Speed USB Video Cam and Flash Disk Controller Datasheet v1.2|Doc - Data Sheet?-- ?PL-2519 Hi-Speed USB Video Cam and Flash Disk Controller
PL-2521 PL-2521 Hi-Speed USB Cellular Mate and Flash Disk Controller Product Datasheet v1.0|Doc - Data Sheet?-- ?PL-2521 Hi-Speed USB CellularMate and Flash Disk Controller
PL-2533 PL-2533 Hi-Speed USB MS-PRO/MS/SD/MMC Card Reader Controller IC Datasheet v1.4|Doc - Data Sheet?-- ?PL-2533 Hi-Speed USB MS PRO/MS/SD/MMC (4-in-1) Card Reader Controller IC
PL-258 FEMALE, RF STRAIGHT ADAPTER, JACK
PL-259 CABLE TERMINATED, MALE, UHF CONNECTOR, SOLDER, PLUG
相關代理商/技術參數
參數描述
PL2507NL 制造商:Pulse Electronics Corporation 功能描述:TRANSFORMER - Bulk
PL-2-5-1016 功能描述:ULTIMIFLUX 101.6X101.6X2MM 制造商:wakefield-vette 系列:ulTIMiFlux? 零件狀態:在售 使用:- 形狀:方形 外形:101.60mm x 101.60mm 厚度:0.0790"（2.007 mm） 材料:硅樹脂人造橡膠 粘合劑:膠粘 - 兩側 底布，載體:- 顏色:金色 熱阻率:- 導熱率:5.0 W/m-K 標準包裝:250
PL-2-5-1016-H 功能描述:ULTIMIFLUX 101.6X101.6X2MM 制造商:wakefield-vette 系列:ulTIMiFlux? 零件狀態:在售 使用:- 形狀:方形 外形:101.60mm x 101.60mm 厚度:0.0790"（2.007 mm） 材料:硅樹脂人造橡膠 粘合劑:膠粘 - 一側 底布，載體:- 顏色:金色 熱阻率:- 導熱率:5.0 W/m-K 標準包裝:250
PL-2515 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hi-Speed USB Flash Disk Controller
PL-2518 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Turbo Hi-Speed USB Flash Disk Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*