
2011-2012 Microchip Technology Inc.
Preliminary
DS41579C-page 373
PIC16(L)F1782/3
30.4
DC Characteristics: PIC16(L)F1782/3-I/E
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C
TA +85°C for industrial
-40°C
TA +125°C for extended
Param
No.
Sym.
Characteristic
Min.
Typ
Max.
Units
Conditions
VIL
Input Low Voltage
I/O PORT:
D034
with TTL buffer
—
0.8
V
4.5V
VDD 5.5V
D034A
—
0.15 VDD
V1.8V
VDD 4.5V
D035
with Schmitt Trigger buffer
—
0.2 VDD
V2.0V
VDD 5.5V
with I2C levels
—
0.3 VDD
V
with SMBus levels
—
0.8
V
2.7V
VDD 5.5V
D036
MCLR, OSC1 (RC mode)(1)
——
0.2 VDD
V
D036A
OSC1 (HS mode)
—
0.3 VDD
V
VIH
Input High Voltage
I/O ports:
D040
with TTL buffer
2.0
—
V
4.5V
VDD 5.5V
D040A
0.25 VDD +
0.8
——
V
1.8V
VDD 4.5V
D041
with Schmitt Trigger buffer
0.8 VDD
——
V
2.0V
VDD 5.5V
with I2C levels
0.7 VDD
——
V
with SMBus levels
2.1
—
V
2.7V
VDD 5.5V
D042
MCLR
0.8 VDD
——
V
D043A
OSC1 (HS mode)
0.7 VDD
——
V
D043B
OSC1 (RC mode)
0.9 VDD
——
V
(Note 1)
IIL
Input Leakage Current(2)
D060
I/O ports
—
± 5
± 125
± 1000
nA
VSS
VPIN VDD, Pin at
high-impedance @ 85°C
125°C
D061
MCLR(3)
—± 50
± 200
nA
VSS
VPIN VDD @ 85°C
IPUR
Weak Pull-up Current
D070*
25
100
140
200
300
A
VDD = 3.3V, VPIN = VSS
VDD = 5.0V, VPIN = VSS
VOL
Output Low Voltage(4)
D080
I/O ports
——
0.6
V
IOL = 8mA, VDD = 5V
IOL = 6mA, VDD = 3.3V
IOL = 1.8mA, VDD = 1.8V
VOH
Output High Voltage(4)
D090
I/O ports
VDD - 0.7
—
V
IOH = 3.5mA, VDD = 5V
IOH = 3mA, VDD = 3.3V
IOH = 1mA, VDD = 1.8V
*
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external
clock in RC mode.
2: Negative current is defined as current sourced by the pin.
3: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
4: Including OSC2 in CLKOUT mode.