參數資料
型號： PGFPL2
廠商： NEC Corp.
英文描述： Flash Memory Programmer
中文描述： 閃存編程
文件頁數： 39/73頁
文件大小： 1375K
代理商： PGFPL2
CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17307EJ2V0UM
39
While programming is in progress, the progress is displayed in the action log window, indicating the operation
of the programmer. This progress indicates the progress of programming the target device as a percentage.
After completing the [Program] command, the GUI software displays the target device command execution
result.
(4) [Verify] command
This command is not supported.
(5) [Security] command
The [Security] command initiates the programming of the security flag of the target device connected to the
FPL2. Set ‘Security flag settings’ on the Advance tab of the [Device] > [Setup…] menu.
(6) [CheckSum] command
The [CheckSum] command initiates the displaying and verifying of the checksum values of the target device
connected to the FPL2 and the user program. "OK” is displayed if the values match, and “ERROR: checksum
does not match” if the values do not match.
(7) [Autoprocedure (EPV)] menu
The [Autoprocedure (EPV)] command sequentially executes the [Erase] and [Program] commands
explained above.
After execution of the [Autoprocedure (EPV)] command, to verify the checksum values of the data written to the
flash memory of the target device and the program file to detect a communication error of the user program
while it is being transmitted, specify automatic execution of the [CheckSum] command after execution of the
[Program] command, using the Command options on the Advance tab of the [Device] > [Setup…] menu.
During EPV, the progress status of the programmer operation is displayed in the action log window. Refer to
CHAPTER 5 USAGE EXAMPLE
for the selected command, and its execution operation and message.
After completing the [Autoprocedure (EPV)] command, the GUI software displays the target device command
execution result.
(8) [Signature read] command
This command is not supported.
(9) [Setup…] command
The [Setup…] command is used to perform flash memory writing settings in accordance with the
user environment, and command option settings. Each time the GUI software is started, the
parameter file (.PRM) and customized setup file (.SET) that were used last are read, and their setting contents
are displayed. Settings can be changed in accordance with the user environment, except for the parameters
that are dimmed. In addition, new settings can be saved to the customized setup file (the data of the
parameter file cannot be changed).
(a) Standard setup
This menu is used to set the rewriting environment of the target device’s flash memory.
The mode of communication with the target device and the operating clock of the device differ depending
on the device used. Refer to the manual of the device used for details.
The following window opens.
相關PDF資料
PDF描述
PGH1508AM Park of diode Bridge & Thyristor
PGH3016AM THYRISTOR 30A AVG 1600 VOLTS
PGH308 THYRISTOR MODULE
PH320 PLASTIC MOLDED PIN PHOTO DIODE
PHM8001 MOSFET MODULE Single 900A/150A
相關代理商/技術參數
參數描述
PGFP-M11 功能描述:PLUG GFCI 120VAC 15A MAN RST RoHS:是 類別:過電壓，電流，溫度裝置 >> 接地故障電路斷路器 (GFCI) 系列:PGFP 標準包裝:1 系列:PGFI 類型:帶 6 英尺引線的直列接頭 技術規格:120V 其它名稱:723-1041
PGFP-M110KYST2 功能描述:CORD GFCI 120VAC 2' YEL SNG TAP RoHS:是 類別:過電壓，電流，溫度裝置 >> 接地故障電路斷路器 (GFCI) 系列:PGFP 標準包裝:1 系列:PGFI 類型:帶 6 英尺引線的直列接頭 技術規格:120V 其它名稱:723-1041
PGFP-M110KY-ST2 制造商:Airpax 功能描述:
PGFP-M110KYST25 功能描述:CORD GFCI 120VAC 25' YEL SNG RoHS:是 類別:過電壓，電流，溫度裝置 >> 接地故障電路斷路器 (GFCI) 系列:PGFP 標準包裝:1 系列:PGFI 類型:帶 6 英尺引線的直列接頭 技術規格:120V 其它名稱:723-1041
PGFP-M110KY-ST25 制造商:Airpax 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*