參數資料
型號: PDI20AT2HR0
文件頁數: 2/4頁
文件大小: 213K
代理商: PDI20AT2HR0
2
Specifications are subject to change without notice (16.10.00)
Compensation
RTD
For 3-wire connections, line
resistance up to 10
Cold junction, within the tem-
perature range from 0 to 55°C
TC
Input RTD ranges
Probe: Pt100
-200°C/-328°F to+600°C /+1112°F
-99.9°C/°F to +600.0°C/+999.9°F
-50°C/-58°F to +150°C/+302°F
-50.0°C/-58.0°F to+150.0°C/+302.0°F
-50°C/-58°F to +150°C/+302°F
-50.0°C/-58.0°F to +150.0°C/+302.0°F
Probe: Ni100
Input PTC ranges:
Probe: KTY81 (990
@ 25°C)
Output Working
Type of output
Direct (cooling) or reverse (heating)
Relay: 5A-AC1, 2A-AC3,
250 VAC, 100.000 cycles
SSR: 6 VDC/max. 15 mA
Relay output: 2000 V
rms
from
output to: measuring input,
AC power supply input.
SSR output: no insulation from
output to measuring
input.
2000 V
rms
from output to
AC power supply input.
1 (on request)
Alarm, ON/OFF, neutral zone
Up alarm or down alarm
0 to 100% of the input range
Programmable minimum and
maximum values
Programmable hysteresis
within the whole measuring
range
Programmable activation
time delay (0 to 500 s)
Programmable dead band
within the whole measuring
range
Direct (cooling) or reverse
(heating)
Relay: 5A-AC1, 2A-AC3,
250 VAC, 100.000 cycles
SSR: 6 VDC/max. 15 mA
Relay output: 2000 V
rms
from
output to measuring input,
AC power supply input.
SSR output: no insulation from
output to measuring
input.
2000 V
rms
from output to
AC power supply input.
Insulation
Alarm output
Output types
Alarm functions
Setpoint adjustment
Limits of setpoint adjustment
ON/OFF control parameters
Neutral zone control
Output working
Type of output
Insulation
Output combinations
- only one control output (Out 1)
type: ON/OFF, PID;
- one independent control
output (Out 1) with additional
alarm output: up, down alarm;
- two dependent ON/OFF
control outputs;
- one ON/OFF control output (Out 1)
with dependent relative or
absolute alarm output:
up, down alarm;
-
one control output with additional
control output (dead band) to
carry out the neutral zone control
1 (standard)
PID, ON/OFF
0 to 100% of the input range.
Programmable minimum
and maximum values
Programmable proportional
band within the whole input
range (1 or 0.1°C resolution);
Programmable manual reset
within the whole input range;
Programmable integral time
(0 to 3600 s);
Programmable derivative
time (0 to 3600 s);
Programmable cycle time
(1 to 500 s)
Programmable hysteresis
within the whole input range;
Programmable activation time
delay (0 to 500 s)
Programmable dead band within
the whole input range (available
only if the 2nd output is present)
Control output
Control types
Setpoint adjustment
Limits of setpoint adjustment
PID control parameters
ON/OFF control parameters
Neutral zone control
PDI 20
Output Specifications
Input TC ranges
Probe: TC-J
Probe: TC-K
Probe: TC-S
Input process signal ranges
0°C/+32°F to +800°C/+1472°F
0°C/+32°F to +1200°C/+2192°F
0°C/+32°F to +1600°C/+2912°F
-999 to 7000
-99.9 to 700.0
3 keys: “S” to enter into the
programming procedure;
“UP/DOWN” for parameter
selection; “S” + “UP/DOWN”
for value programming
Key-pad
Input Specifications (cont.)
Dynamic setpoint
(see fig. 4)
- Action only on 1st output,
automatic increase of the
set-point up to the pro-
grammed one
- Half band programming (drb)
(0 to 100% of the input range)
over which the dynamic
set-point is active
Software functions
- step increase (dSI) parameter,
programmable from 0 to
100% of the input range
- time interval (dSt) between
two step increases pro-
grammable from 1 to 3600 s
相關PDF資料
PDF描述
PDI20AT2HRX
PDI20AT2L0R
PDI20AT2L0X
PDI20AT2LR0
PDI20AT2LRX
相關代理商/技術參數
參數描述
PDI20AT2LRX 制造商:Carlo Gavazzi 功能描述:1DISP RTD 24VAC/DC REL
PDI-2325-0 制造商:Power Dynamics Inc 功能描述:Surface Mount CR2430 Battery Holder
PDI-2325-1 制造商:Power Dynamics Inc 功能描述:
PDI-2425 制造商:Power Dynamics Inc 功能描述:
PDI-2425-0 制造商:Power Dynamics Inc 功能描述: