1996 Nov 21
3
Philips Semiconductors
Product specification
Pulse and DTMF diallers with redial
PCD3310; PCD3310A
1
FEATURES
Pulse, DTMF and ‘mixed mode’ dialling
Mixed mode dialling: start with pulse dial, end with
DTMF dial (e.g. for control of DTMF user equipment via
a pulse network)
23-digit memory stores last number dialled, or number
noted during conversation (notepad)
Redial of both PABX and external calls
Supports 16 dial keys: 0 to 9,
, # A, B, C, and D
Supports 4 function keys:
– Program (P) used to input notepad numbers
– Flash (FL) allows re-dialling without on-hook
– Redial (R) recalls and redialls stored number
– Change from pulse dial to DTMF dial in
mixed mode (>)
DTMF timing:
– for manual dialling, maximum duration burst/pause
intervals are user-determined, but at least minimum
duration burst/pause intervals are ensured
– for redial, minimum duration burst/pause intervals are
used
On-chip voltage reference for supply and temperature
independent tone output
On-chip filtering for low output distortion
(CEPT compatible)
On-chip oscillator uses low-cost 3.58 MHz (TV colour
burst) crystal or piezo resonator
Uses standard single-contact or double-contact
(common left open) keyboard
Keyboard entries fully debounced
Flash (register recall) output.
2
GENERAL DESCRIPTION
The PCD3310 and PCD3310A are single-chip silicon gate
CMOS integrated circuits. They are dual-standard diallers
for pulse or dual tone multi-frequency (DTMF) dialling, with
on-chip oscillators suitable for use with 3.58 MHz crystals.
Input data is derived from any standard matrix keyboard
for dialling in either the pulse or DTMF mode.
Numbers up to 23 digits can be retained in RAM for
dialling/redialling.
3
QUICK REFERENCE DATA
SYMBOL
V
DD
V
stb
I
DD(stb)
I
DD(conv)
I
DD(pulse)
I
DD(DTMF)
V
HG(RMS)
PARAMETER
CONDITIONS
MIN.
2.5
1.8
TYP.
MAX.
6.0
6.0
4
150
200
0.9
UNIT
V
V
μ
A
μ
A
μ
A
mA
mV
operating supply voltage
standby supply voltage
standby current (on hook)
operating current in conversation mode
operating current in pulse dialling mode
operating current in DTMF dialling mode
DTMF output voltage level for HIGH group
(RMS value)
DTMF output voltage level for LOW group
(RMS value)
voltage gain (pre-emphasis) of group
total harmonic distortion
operating ambient temperature
1.4
0.6
192
V
stb
= 1.8 V
V
DD
= 3 V
V
DD
= 3 V
V
DD
= 3 V
V
LG(RMS)
150
mV
G
v
THD
T
amb
25
2.1
25
+70
dB
dB
°
C