參數資料
型號: PCA9665N
廠商: NXP SEMICONDUCTORS
元件分類: 總線控制器
英文描述: Fm+ parallel bus to I2C-bus controller
中文描述: I2C BUS CONTROLLER, PDIP20
封裝: 0.300 INCH, PLASTIC, MS-001, SOT146-1, DIP-20
文件頁數: 51/91頁
文件大?。?/td> 372K
代理商: PCA9665N
PCA9665_2
NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 02 — 7 December 2006
51 of 91
NXP Semiconductors
PCA9665
Fm+ parallel bus to I
2
C-bus controller
the SCL line is held LOW by the PCA9665 after the 2 bytes have been sent
the PCA9665 sends an Interrupt, sets SI = 1 and updates I2CSTA register
I2CSTA reads 28h
5. Program I2CCOUNT = 40h (64 bytes to read and Last byte acknowledged).
6. Load I2CDAT with A1h (I
2
C-bus slave address and Read command).
7. Program I2CCON with STA = 1, SI = 0, MODE = 1.
the PCA9665 sends a ReSTART command
an interrupt is asserted and the I2CSTA register is updated
the I2CSTA register reads 10h
8. Program I2CCON with STA = STO = SI = 0, MODE = 1.
address A1h is sent followed by a read of 64 data bytes
the last data byte is acknowledged
the SCL line is held LOW by the PCA9665 after the data is read
the PCA9665 sends an interrupt and updates I2CSTA register
I2CSTA reads 50h
9. The microcontroller reads the 64 data bytes from the PCA9665.
10. Program I2CCOUNT = C0h (64 bytes and Last byte is not acknowledged).
11. Program I2CCON with STA = STO = SI = 0, MODE = 1.
12. The PCA9665 reads 64 bytes and does not acknowledge the last byte.
the PCA9665 sends an Interrupt and updates I2CSTA register
the I2CSTA reads 58h
the SCL line is held LOW by the PCA9665
the slave should release the SDA line
13. The microcontroller reads the 64 bytes from the PCA9665.
14. Program I2CCON with SI = STA = 0, ST0 = 1, MODE = X.
the PCA9665 sends a STOP condition
no interrupt is generated by the PCA9665
the I2CSTA register contains F8h
8.6 I2CCOUNT register
When a write to the I2CCOUNT register is requested, the buffer pointer is reset and points
at the first byte. Loading of the data in the I2CDAT buffer then starts at the first byte.
Once an operation has been performed (SI = 1 and an interrupt is generated), the
I2CCOUNT register contains the number of bytes that have been received (Receiver
mode) or the number of bytes that have been sent (Transmitter mode). See
Table 42
for
more information.
In Buffered Transmitter mode, the first byte that is sent to the I
2
C-bus is always the first
byte that has been loaded in the I2CDAT buffer.
相關PDF資料
PDF描述
PCA9671 Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9671DB Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9671DK Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9673 Remote 16-bit I/O expander for Fm+ I2C-bus with interrupt and reset
PCA9673DB Remote 16-bit I/O expander for Fm+ I2C-bus with interrupt and reset
相關代理商/技術參數
參數描述
PCA9665N,112 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665PW 制造商:NXP Semiconductors 功能描述:IC CNTRLR PARALLEL I2C 20TS 制造商:UNBRANDED 功能描述:UNIVERSAL BUS FUNCTIONS FM+12C BUS *NIC* 制造商:NXP Semiconductors 功能描述:IC, CNTRLR PARALLEL, I2C, 20TSSOP 制造商:NXP Semiconductors 功能描述:IC, CNTRLR PARALLEL, I2C, 20TSSOP; Interface Type:I2C, Parallel, SMBus; Interface Applications:I2C Bus & SMBus Systems Applications; Supply Voltage Min:2.3V; Supply Voltage Max:3.6V; Digital IC Case Style:TSSOP; No. of Pins:20; ;RoHS Compliant: Yes
PCA9665PW,112 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665PW,118 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665PW,118-CUT TAPE 制造商:NXP 功能描述:PCA9635 Series 1 MHz Fm + Parallel Bus to I2C-Bus Controller - TSSOP-20