參數資料
型號： PCA9621PW,118
廠商： NXP Semiconductors
文件頁數： 13/18頁
文件大?。?/td> 0K
描述： IC BUS PORT 8BIT 65MA 16TSSOP
產品培訓模塊： I²C Bus Fundamentals
特色產品： NXP - I2C Interface
標準包裝： 1
接口： I²C 總線，SM 總線
輸入/輸出數： 8
中斷輸出： 無
頻率 - 時鐘： 1MHz
電源電壓： 2.7 V ~ 5.5 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 16-TSSOP（0.173"，4.40mm 寬）
供應商設備封裝： 16-TSSOP
包裝： 標準包裝
其它名稱： 568-6703-6
PCA9621
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 1 — 9 March 2011
4 of 18
NXP Semiconductors
PCA9621
65 mA 8-bit 2-wire bus output port
7.
Functional description
7.1 VDD, VSS — DC supply pins
The power supply voltage for the PCA9621 may be any voltage in the range 2.7 V to
5.5 V. All other I/Os are clamped to VDD and VSS through ESD protection diodes.
7.2 SCL, SDA — 2-wire bus interface
The state of the output ports is determined by the Control register, which is set and read
via a 2-wire bus interface using I2C-bus style signalling. The interface is Fast-mode Plus
(Fm+) I2C-bus compatible, though the ports contain ESD protection diodes to the positive
and negative supplies. Consequently, VI2C-bus (voltage at SCL and SDA) must remain
within the VDD and VSS supply levels.
7.3 P0 to P7 — output ports
There are eight open-drain output ports whose state is determined by the Control register.
Programming a ‘1’ or HIGH to the relevant register bit will turn on the corresponding port,
resulting at a LOW or ‘0’ at the port. In the case of LED driving, this would result in the
LED turning ON.
Programming a ‘0’ or LOW in the register turns off the open-drain port, placing it in a
high-impedance mode.
The ports are protected by ESD diodes to the supplies so they must not be driven above
the VDD or below the VSS levels.
7.4 RESET — reset IC to default state
The active LOW RESET input is used to disable the buffer and reset it to its default state.
The RESET signal will clear the contents of the Control register, turning off all output
ports, and resetting the state of the I2C-bus slave transceiver block.
7.5 Power-On Reset (POR)
During power-on, the PCA9621 is internally held in the reset condition for a maximum of
trst = 500 ns. The default condition after reset is for the Control register to be erased
(all zeros), resulting in all output ports being off (high-impedance).
相關PDF資料
PDF描述
PCA9655EDWR2G IC I/O EXPANDER I2C 16B SOIC-24
PCA9670D,512 IC I/O EXPANDER I2C 8B 16SOIC
PCA9671D,112 IC I/O EXPANDER I2C 16B 24SOIC
PCA9672PW,118 IC I/O EXPANDER I2C 8B 16TSSOP
PCA9673DB,112 IC I/O EXPANDER I2C 16B 24SSOP
相關代理商/技術參數
參數描述
PCA9622BS,118 功能描述:LED照明驅動器 16-BIT FM+ I2C-BUS 100MA 40V LED DRIVER RoHS:否 制造商:STMicroelectronics 輸入電壓:11.5 V to 23 V 工作頻率: 最大電源電流:1.7 mA 輸出電流: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:SO-16N
PCA9622DR 制造商:NXP Semiconductors 功能描述:IC LED DRIVER RGBA 32-TSSOP 制造商:NXP Semiconductors 功能描述:IC, LED DRIVER, RGBA, 32-TSSOP 制造商:NXP Semiconductors 功能描述:IC, LED DRIVER, RGBA, 32-TSSOP; No. of Outputs:16; Output Current:100mA; Output Voltage:40V; Driver Case Style:TSSOP; Input Voltage Min:2.3V; Input Voltage Max:5.5V; Dimming Control Type:PWM; Switching Frequency:1MHz; Operating ;RoHS Compliant: Yes
PCA9622DR,118 功能描述:LED照明驅動器 16-BIT FM+ I2C-BUS 100mA 40V LED driver RoHS:否 制造商:STMicroelectronics 輸入電壓:11.5 V to 23 V 工作頻率: 最大電源電流:1.7 mA 輸出電流: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:SO-16N
PCA9622DR,118-CUT TAPE 制造商:NXP 功能描述:PCA9622 Series 100 mA 5.5 V 1 MHz SMT 16-bit I2C-Bus LED Driver - TSSOP-32
PCA9622DR118 制造商:NXP Semiconductors 功能描述:IC LED DRVR TSSOP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*