- 您現在的位置：買賣IC網 > PDF目錄382378 > PCA9513DP Hot swappable IC and SMBus bus buffer PDF資料下載
參數資料
| 型號： | PCA9513DP |
| 英文描述： | Hot swappable IC and SMBus bus buffer |
| 中文描述： | 熱插拔集成電路和SMBus總線緩沖器 |
| 文件頁數： | 2/20頁 |
| 文件大?。?/td> | 162K |
| 代理商： | PCA9513DP |
Philips Semiconductors
Product data sheet
PCA9513; PCA9514
Hot swappable I
2
C and SMBus bus buffer
2
2004 Oct 05
DESCRIPTION
The PCA9513 and PCA9514 are hot swappable I
2
C and SMBus
buffers that allows I/O card insertion into a live backplane without
corrupting the data and clock buses. Control circuitry prevents the
backplane from being connected to the card until a stop command
or bus idle occurs on the backplane without bus contention on the
card. When the connection is made, the PCA9511, PCA9513, and
PCA9514 provides bi-directional buffering, keeping the backplane
and card capacitances isolated.
Rise time accelerator circuitry allows the use of weaker DC pull-up
currents while still meeting rise time requirements. The PCA9513
and PCA9514 incorporate a digital ENABLE input pin, which
enables the device when asserted HIGH and forces the device into
a low current mode when asserted LOW, and an open-drain READY
output pin, which indicates that the backplane and card sides are
connected together (HIGH) or not (LOW).
The PCA9513 supplies a 92
μ
A current source to SCLIN and SDAIN
in lieu of using pull-up resistors for PICMG backplane applications.
Including the current source in the device provides for a consistent
RC time constant as cards are removed and inserted into the
backplane. The current source is high-impedance whenever the pin
voltage is greater than the part V
CC
.
PCA9513 and PCA9514 rise time accelerator threshold is 0.8 V to
provide improved noise margin over the PCA9510 and PCA9511.
The dynamic offset design of the PCA9510/11/12/13/14 I/O drivers
allow them to be connected to another PCA9510/11/12/13/14 device
in series or in parallel and to the A side of the PCA9517. The
PCA9510/11/12/13/14 can
not
connect to the static offset I/Os used
on the PCA9515/15A/16/16A/17 B side and PCA9518.
APPLICATION
cPCI, VME, AdvancedTCA cards and other multi-point backplane
cards that are required to be inserted or removed from an
operating system.
FEATURES
Bi-directional buffer for SDA and SCL lines increases fanout and
prevents SDA and SCL corruption during live board insertion and
removal from multi-point backplane systems
Compatible with I
2
C standard mode, I
2
C fast mode, and SMBus
standards
V/
t rise time accelerators on all SDA and SCL lines
Rise time accelerator threshold moved from 0.6 V to 0.8 V for
improved noise margin
Active HIGH ENABLE input
Active HIGH READY open-drain output
High-impedance SDA and SCL pins for V
CC
= 0 V
92
μ
A current source on SCLIN and SDAIN for PICMG backplane
applications (PCA9513 only)
Supports clock stretching and multiple master
arbitration/synchronization
Operating power supply voltage range: 2.7 V to 5.5 V
5.5 V tolerant I/Os
0 kHz to 400 kHz clock frequency
ESD protection exceeds 2000 V HBM per JESD22-A114,
200 V MM per JESD22-A115, and 1000 V CDM per
JESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which
exceeds 100 mA
Packages offered: SO8, TSSOP8 (MSOP8)
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
ORDER CODE
TOPSIDE MARK
DRAWING NUMBER
8-pin plastic SO
–40
°
C to +85
°
C
PCA9513D
PCA9513
SOT96-1
8-pin plastic SO
–40
°
C to +85
°
C
PCA9514D
PCA9514
SOT96-1
8-pin plastic TSSOP (MSOP)
–40
°
C to +85
°
C
PCA9513DP
9513
SOT505-1
8-pin plastic TSSOP (MSOP)
Standard packing quantities and other packaging data are available at www.standardproducts.philips.com/packaging.
–40
°
C to +85
°
C
PCA9514DP
9514
SOT505-1
相關PDF資料 |
PDF描述 |
|---|---|
| PCA9514D | Hot swappable IC and SMBus bus buffer |
| PCA9514DP | Hot swappable IC and SMBus bus buffer |
| PCA9513 | Hot swappable IC and SMBus bus buffer |
| PCA9513D | Hot swappable IC and SMBus bus buffer |
| PCA9515A | I2C-bus repeater |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCA9513DP,118 | 功能描述:緩沖器和線路驅動器 HOT SWAP I2C/SMBUS BUS BUFFER RoHS:否 制造商:Micrel 輸入線路數量:1 輸出線路數量:2 極性:Non-Inverting 電源電壓-最大:+/- 5.5 V 電源電壓-最小:+/- 2.37 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Reel |
| PCA9514 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Level translating I2C-bus repeater |
| PCA9514A | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Hot swappable I2C-bus and SMBus bus buffer |
| PCA9514AD | 制造商:NXP Semiconductors 功能描述: |
| PCA9514AD,112 | 功能描述:緩沖器和線路驅動器 HOT SWAP I2C/SMBUS BUS BUFFER RoHS:否 制造商:Micrel 輸入線路數量:1 輸出線路數量:2 極性:Non-Inverting 電源電壓-最大:+/- 5.5 V 電源電壓-最小:+/- 2.37 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。