
Philips Semiconductors
Preliminary specification
83C453/87C453
80C51 8-bit microcontroller family
8K/256 OTP/ROM, expanded I/O
2
1998 Apr 23
DESCRIPTION
The Philips 8XC453 is an I/O expanded single-chip microcontroller
fabricated with Philips high-density CMOS technology. Philips
epitaxial substrate minimizes latch-up sensitivity.
The 8XC453 is a functional extension of the 87C51 microcontroller
with three additional I/O ports and four I/O control lines. The 8XC453
is available in 68-pin LCC packages. Four control lines associated
with port 6 facilitate high-speed asynchronous I/O functions.
The 87C453 includes an 8k
×
8 EPROM, a 256
×
8 RAM, 56 I/O
lines, two 16-bit timer/counters, a seven source, two priority level,
nested interrupt structure, a serial I/O port for either a full duplex
UART, I/O expansion, or multi-processor communications, and
on-chip oscillator and clock circuits.
The 87C453 has two software selectable modes of reduced activity
for further power reduction; idle mode and power-down mode. Idle
mode freezes the CPU while allowing the RAM, timers, serial port,
and interrupt system to continue functioning. Power-down mode
freezes the oscillator, causing all other chip functions to be
inoperative while maintaining the RAM contents.
FEATURES
80C51 based architecture
Seven 8-bit I/O ports
Port 6 features:
–
Eight data pins
–
Four control pins
–
Direct MPU bus interface
–
ISA Bus Interface
–
Parallel printer interface
–
IBF and OBF interrupts
–
A flag latch on host write
On the microcontroller:
–
8k
×
8 EPROM
Quick pulse programming algorithm
Two-level program security system
–
256
×
8 RAM
–
Two 16-bit counter/timers
–
Two external interrupts
External memory addressing capability
–
64k ROM and 64k RAM
Low power consumption:
–
Normal operation: less than 24mA at 5V, 16MHz
–
Idle mode
–
Power-down mode
Reduced EMI
Full-duplex enhanced UART
–
Framing error detection
–
Automatic address recognition
ORDERING INFORMATION
EPROM
1
ROM
TEMPERATURE
°
C AND PACKAGE
FREQ.
(MHz)
PKG. DWG
#
P87C453EBAA
OTP
P83C453EBAA
68–Pin Plastic Leaded Chip Carrier, 0 to +70
3.5 to 16
SOT188-3
NOTE:
1. OTP = One-Time Programmable EPROM.