
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Optical Emitter and Sensor Pair
OPB100Z, OPB100EZ, OPB100SZ
OPTEK Technology Inc. —
1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 01/06
Page 1 of 3
Features:
890 nm infrared LED emitter
Silicon phototransistor sensor
Snap-in mounting
Variable sensing distance over 36” (91.4 cm)
Low profile package
24” (61.0 cm) wire leads
Description:
The
OPB100
series consists of an infrared LED (
OPB100EZ
) and phototransistor (
OPB100SZ
) in separate
plastic housings. The low cost, snap-in design requires no screws or other mounting hardware for ease of
installation.
The emitter and sensor are not apertured, which allows separation distances in excess of 36” (91.4 cm) without
concern for precise alignment. The front side clip allows mounting of the product to any 0.062” (1.57 mm) thick
material.
This product is designed for general switching and low-speed data communications applications.
Red
Black
White
Green
Ordering Information
Part
Number
LED Peak
Wavelength
Sensor
Lead Length /
Spacing
OPB100Z
880 nm
Transistor
OPB100-EZ
OPB100-SZ
24" / 26 AWG Wire
Applications:
Non-contact reflective object
Non-contact interruptive sensing
Assembly line automation
Machine automation
Machine safety
SNAP BODY
Emitter (LED)
Phototransistor
Symbolize Cover
26 AWG
UL Rated
Color/Pin
Description
Red-1
Anode
Black-2
Cathode
White-3
Collector
Green-4
Emitter
RoHS