
SURFACE MOUNT 3000 Watt
Transient Voltage Suppressor
Microsemi
Scottsdale Division
Page 1
Copyright
2009
4-06-2009 REV J
WWW
.Micr
o
semi
.CO
M
S C O T TS DALE DIVISION
SMLJ5.0 thru SMLJ170CA, e3
and SMLG5.0 thru SMLG170CA, e3
SML
5.0
–
170V,
e3
DESCRIPTION
APPEARANCE
The SMLJ5.0-170A or SMLG5.0-170A series of 3000 W Transient Voltage
Suppressors (TVSs) protects a variety of voltage-sensitive components
from destruction or degradation. It is available in J-bend design (SMLJ)
with the DO-214AB package for greater PC board mounting density or in a
Gull-wing design (SMLG) in the DO-215AB for visible solder connections.
Selections include unidirectional and bidirectional. They can protect from
secondary lightning effects per IEC61000-4-5 and class levels defined
herein, or for inductive switching environments and induced RF protection.
in protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
IMPORTANT:
FEATURES
APPLICATIONS / BENEFITS
Economical surface mount TVS design in both J-bend
or Gull-wing terminations with fast response
Available in both Unidirectional and Bidirectional
construction with a C or CA suffix
Selections for 5.0 to 170 volts standoff voltages (VWM)
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for
added 100% temperature cycle -55
oC to +125oC (10X)
as well as surge (3X) and 24 hours HTRB with post
test VZ & IR (in the operating direction for unidirectional
or both directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, and JANTXV are available by
adding MQ, MX, or MV prefixes respectively to part
numbers
Axial-lead packages for thru-hole mounting available
as 5KP5.0–110A with 5000 W rating (consult factory
for other surface mount options)
RoHS Compliant devices available by adding e3 suffix
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
Suppresses transients up to 3000 watts @ 10/1000 s
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1 & 2: SML 5.0 to SML 170A or CA
Class 3: SML 5.0 to SML 150A or CA
Class 4: SML 5.0 to SML 75A or CA
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1: SML 5.0 to SML 170A or CA
Class 2: SML 5.0 to SML 90A or CA
Class 3: SML 5.0 to SML 48A or CA
Class 4: SML 5.0 to SML 24A or CA
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: SML 5.0 to SML 43A or CA
Class 3: SML 5.0 to SML 22A or CA
Class 4: SML 5.0 to SML10A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Peak Pulse Power dissipation at 25C: 3000 watts at
10/1000 μs (also see Fig 1,2, and 3)
Impulse repetition rate (duty factor): 0.01%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65C to +150C
Thermal resistance: 17.5C/W junction to lead, or
77.5
C/W junction to ambient when mounted on FR4
PC board (1 oz Cu) with recommended footprint
Steady-State Power dissipation: 6 watts at TL = 45
oC,
or 1.61 watts at TA = 25
C when mounted on FR4 PC
board with recommended footprint
Forward Surge at 25C: 200 Amps peak impulse of
8.3 ms half-sine wave (unidirectional only)
Solder temperatures: 260 C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Gull-wing or C-bend (modified J-bend)
leads with tin-lead or RoHS Compliant annealed
matte-Tin plating solderable per MIL-STD-750,
method 2026
POLARITY: Cathode indicated by band. No marking
on bidirectional devices
MARKING: Part number without SM and G or J prefix
(e.g. L5.0, L5.0A, L5.0Ae3, L5.0CA, L36, L36A,
L36Ae3, L36CAe3, etc.)
TAPE & REEL option: Standard per EIA-481-2 with
16 mm tape, 750 per 7 inch reel or 2500 per 13 inch
reel (add “TR” suffix to part number)
WEIGHT: 0.25 grams
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503