
2
s Product Specifications
sMaterials
D.U.T
Termination
Network Analyzer
Test Set
Test Port
Test Port Cable
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement system of the diagram below.
NOTE 1: Cable type connectors were measured with connectors attached to both
ends of a suitable 25cm cable.
NOTE 2: Board type connectors were measured with connectors attached to a 50
and a 75
board.
sStructure of the Product Number
This information is used to determine the product specifications from
the product number expression.
At the time of ordering, select from the product number expressions on
Pages 3 to 4 of this catalog.
[From among the plugs, when using UL20537 and PF75VCAS (flat
cable for 75
use), cable assembly is performed only by HIROSE
ELECTRIC CO., LTD. At time of ordering, please do so including the
cable harness specifications.]
Ratings
Nominal characteristic impedance
50
and 75
50
: 1.7 GHz
Frequency rating
75
: 150 MHz
Operating temperature range
-30C to +80C
Operating humidity
90% or less
3 Suitable cable for plugs
0.8D: CO-6F-DSB-CX-50 (50
)
A12B0733-01 (50
)
CO-6FPFA-SB-CX75 (1X0.12) (75
)
1.27: UL20537 PF75VCAS (75
)
For receptacles and plug receptacles
SMT: Printed circuit board surface mounting type
Item
Specification
Condition
1. Contact resistance
Center : 35 m
or less
Outside: 20 m
or less
Measured at 100 mA or less
4. V.S.W.R.(*)
50
: 1.3 or less
75
: 1.2 or less
Up to 1.7 GHz
Up to 150 MHz
6. Repetitive operation
Contact resistance
Center : 40 m
or less
Outside: 25 m
or less
50 cycles of insertion and removal
7. Vibration resistance
No momentary disconnections of 10 s or longer
No damage, cracks, or parts looseness
Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, for
10 cyles in the direction of each of the 3 axes
8. Shock resistance
No electrical momentary disconnections of 10 s or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
waveform, for 3 cycles in the direction of each of the 3 axes
9. Humidity resistance
Contact resistance
Center : 35 m
or less
Outside: 20 m
or less
Insulation resistance 10 M
or greater
Temperature +40C, Humidity 90 to 95%,
let stand for 96 hours
10. Temperature cycle
Contact resistance
Center : 35 m
or less
Outside: 20 m
or less
Insulation resistance 500 M
or greater
Temperature: -30C / 5 to 35C
/ 80C
/ 5 to 35C
Time:
30 min. / Within 5 min./ 30 min. / Within 5 min.
Cycles: 5
2. Insulation resistance
500 M
or greater
Measured at 500 V DC
3. Withstand voltage
No line or insulation breakdown
500 V AC for one minute
5. Female contact holding force 0.2 N or greater
Measured with a steel gauge of 0.29 width
11. Salt spray test
No excessive corrosion
48 hours continuous exposure to 5% salt water
MRF03 –
–
–11
12
3
4
1 Series name: MRF03
4 Suffix
2 Connector types
6P: 6-contact plug
6R: 6-contact receptacle
6PR: 6-contact plug receptacle
Part
Material
Processing
Shell
Phosphor bronze
Contacts: Nickel plating
Wiring portion: Solder plating
Insulator
Polyamide resin
Black (UL94HB)
Center contact
Phosphor bronze
Contacts: Gold plating
Wiring: Solder plating
Case
PPS resin
Black (UL94V-0)
Reinforcement plate Brass
Solder plating
Lock spring (NOTE) Stainless steel
––––––––
Clamp (NOTE)
Stainless steel
––––––––
NOTE: Complete locking type plugs