- 您現在的位置：買賣IC網 > PDF目錄53816 > MPC9330FAR2 (FREESCALE SEMICONDUCTOR INC) 120 MHz, OTHER CLOCK GENERATOR, PQFP32 PDF資料下載
參數資料
| 型號： | MPC9330FAR2 |
| 廠商： | FREESCALE SEMICONDUCTOR INC |
| 元件分類： | 時鐘產生/分配 |
| 英文描述： | 120 MHz, OTHER CLOCK GENERATOR, PQFP32 |
| 封裝： | LQFP-32 |
| 文件頁數： | 1/10頁 |
| 文件大小： | 148K |
| 代理商： | MPC9330FAR2 |
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order Number: MPC9330/D
Rev 3, 01/2003
MOTOROLA ADVANCED CLOCK DRIVERS DEVICE DATA
78
3.3V 1:6 LVCMOS PLL Clock
Generator
The MPC9330 is a 3.3V compatible, 1:6 PLL based clock generator
targeted for high performance low-skew clock distribution in mid-range to
high-performance telecomm, networking and computing applications.
With output frequencies up to 120 MHz and output skews less than 150ps
the device meets the needs of the most demanding clock applications.
The MPC9330 is specified for the temperature range of 0
°C to +70°C.
Features
1:6 PLL based low-voltage clock generator
3.3V power supply
Generates clock signals up to 120 MHz
Maximum output skew of 150 ps
On-chip crystal oscillator clock reference
Alternative LVCMOS PLL reference clock input
Internal and external PLL feedback
PLL multiplies the reference clock by 4x, 3x, 2x, 1x, 4/3x, 3/2x, 2/3x, x/2,
x/3 or x/4
Supports zero-delay operation in external feedback mode
Synchronous output clock stop in logic low eliminates output runt pulses
Power_down feature reduces output clock frequency
Drives up to 12 clock lines
32 lead LQFP packaging
Ambient temperature range 0°C to +70°C
Internal Power–Up Reset
Pin and function compatible to the MPC930
Functional Description
The MPC9330 utilizes PLL technology to frequency lock its outputs onto an input reference clock. Normal operation of the
MPC9330 requires either the selection of internal PLL feedback or the connection of one of the device outputs to the feedback
input to close the PLL feedback path in external feedback mode. The reference clock frequency and the divider for the feedback
path determine the VCO frequency. Both must be selected to match the VCO frequency range. In external PLL feedback
configuration and with the available post-PLL dividers (divide-by-2, divide-by-4 and divide-by-6), the internal VCO of the
MPC9330 is running at either 4x, 8x, 12x, 16x or 24x of the reference clock frequency. In internal feedback configuration (divide-
by-16) the internal VCO is running 16x of the reference frequency. The frequency of the QA, QB, QC output banks is a division of
the VCO frequency and can be configured independently for each output bank using the FSELA, FSELB and FSELC pins,
respectively. The available output to input frequency ratios are 4x, 3x, 2x, 1x, 4/3x, 3/2x, 2/3x, x/2, x/3 or x/4.
The REF_SEL pin selects the internal crystal oscillator or the LVCMOS compatible input as the reference clock signal. The
PLL_EN control selects the PLL bypass configuration for test and diagnosis. In this configuration, the selected input reference
clock is routed directly to the output dividers bypassing the PLL. The PLL bypass is fully static and the minimum clock frequency
specification and all other PLL characteristics do not apply.
The outputs can be disabled (high-impedance) by deasserting the OE/MR pin. In the PLL configuration with external feedback
selected, deasserting OE/MR causes the PLL to loose lock due to missing feedback signal presence at FB_IN. Asserting OE/MR
will enable the outputs and close the phase locked loop, enabling the PLL to recover to normal operation. The MPC9330 output
clock stop control allows the outputs to start and stop synchronously in the logic low state, without the potential generation of runt
pulses.
The MPC9330 is fully 3.3V compatible and requires no external loop filter components. All inputs (except XTAL) accept
LVCMOS signals while the outputs provide LVCMOS compatible levels with the capability to drive terminated 50
W transmission
lines. For series terminated transmission lines, each of the MPC9330 outputs can drive one or two traces giving the devices an
effective fanout of 1:12. The device is packaged in a 7x7 mm2 32-lead LQFP package.
2
FA SUFFIX
32 LEAD LQFP PACKAGE
CASE 873A
MPC9330
3.3V 1:6 LVCMOS
PLL CLOCK GENERATOR
相關PDF資料 |
PDF描述 |
|---|---|
| MPC9330FA | 120 MHz, OTHER CLOCK GENERATOR, PQFP32 |
| MPC9817SD | 66 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO20 |
| MPC9817EN | 66 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO20 |
| MPC9850VM | 500 MHz, PROC SPECIFIC CLOCK GENERATOR, PBGA100 |
| MPD300 | SILICON, STABISTOR DIODE, DO-35 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MPC9331 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:3.3 V 1:6 LVCMOS PLL Clock Generator |
| MPC9331AC | 功能描述:時鐘發生器及支持產品 FSL1-6 LVCMOS/LVPECL LVCMOS PLL Clk Gen RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| MPC9331ACR2 | 功能描述:時鐘發生器及支持產品 FSL1-6 LVCMOS/LVPECL LVCMOS PLL Clk Gen RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| MPC9331FA | 功能描述:時鐘發生器及支持產品 3.3V 200MHz Clock Generator RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56 |
| MPC9331FAR2 | 功能描述:IC CLOCK GEN 1:6 PLL LV 32-LQFP RoHS:否 類別:集成電路 (IC) >> 時鐘/計時 - 時鐘發生器，PLL，頻率合成器 系列:- 標準包裝:39 系列:- 類型:* PLL:帶旁路 輸入:時鐘 輸出:時鐘 電路數:1 比率 - 輸入:輸出:1:10 差分 - 輸入:輸出:是/是 頻率 - 最大:170MHz 除法器/乘法器:無/無 電源電壓:2.375 V ~ 3.465 V 工作溫度:0°C ~ 70°C 安裝類型:* 封裝/外殼:* 供應商設備封裝:* 包裝:* |
發布緊急采購，3分鐘左右您將得到回復。