
MPC5604P Microcontroller Data Sheet, Rev. 4
Freescale Semiconductor
26
VDD_LV_CORx
SR Internal supply voltage
—
V
VSS_LV_CORx
SR Internal reference voltage
—
0
V
SR Internal supply voltage
—
V
SR Internal reference voltage
—
0
V
TA
SR Ambient temperature under bias
fCPU = 64 MHz
–40
105
°C
fCPU = 60 MHz
–40
125
TJ
SR Junction temperature under bias
—
–40
150
°C
1 Full functionality cannot be guaranteed when voltage drops below 4.5 V. In particular, ADC electrical characteristics
and I/Os DC electrical specification may not be guaranteed.
2 The power supply voltage must be identical for ADC0 and ADC1
3 To be connected to emitter of external NPN. Low voltage supplies are not under user control—they are produced
by an on-chip voltage regulator—but for the device to function properly the low voltage grounds (VSS_LV_xxx) must
be shorted to high voltage grounds (VSS_HV_xxx) and the low voltage supply pins (VDD_LV_xxx) must be connected
to the external ballast emitter.
4 The low voltage supplies (V
DD_LV_xxx) are not all independent.
VDD_LV_COR1 and VDD_LV_COR2 are shorted internally via double bonding connections with lines that provide
the low voltage supply to the data flash module. Similarly, VSS_LV_COR1 and VSS_LV_COR2 are internally
shorted.
VDD_LV_REGCOR and VDD_LV_RECORx are physically shorted internally, as are VSS_LV_REGCOR and
VSS_LV_CORx.
VDD_LV_PLL and VSS_LV_PLL are independent of other supplies.
5 Low voltage supply/ground lines of the FMPLLs internally are physically separate but are shorted with a
double-bonding connection on the VDD_LV_PLL and VSS_LV_PLL pins.
Table 7. Recommended Operating Conditions (3.3 V)
Symbol
Parameter
Conditions
Min
Max1
Unit
VDD_HV_REG
SR 3.3 V voltage regulator supply voltage
—
3.0
3.6
V
VDD_HV_IOx
SR 3.3 V input/output supply voltage
—
3.0
3.6
V
VSS_HV_IOx
SR Input/output ground voltage
—
0
V
VDD_HV_FL
SR 3.3 V code and data flash supply voltage
—
3.0
3.6
V
VSS_HV_FL
SR Code and data flash ground
—
0
V
VDD_HV_OSC
SR 3.3 V crystal oscillator amplifier supply
voltage
—
3.0
3.6
V
VSS_HV_OSC
SR 3.3 V crystal oscillator amplifier reference
voltage
—
0
V
VDD_HV_AD0
2
SR 3.3 V ADC0 supply and high reference
voltage
—
3.0
3.6
V
VSS_HV_AD0
SR ADC0 ground and low reference voltage
—
0
V
SR 3.3 V ADC1 supply and high reference
voltage
—
3.0
3.6
V
Table 6. Recommended Operating Conditions (5.0 V) (continued)
Symbol
Parameter
Conditions
Min
Max1
Unit