- 您現在的位置：買賣IC網 > PDF目錄383602 > MH89790BN (Mitel Networks Corporation) Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 PDF資料下載
參數資料
| 型號： | MH89790BN |
| 廠商： | Mitel Networks Corporation |
| 元件分類： | 通信及網絡 |
| 英文描述： | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| 中文描述： | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| 文件頁數： | 8/32頁 |
| 文件大?。?/td> | 488K |
| 代理商： | MH89790BN |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁當前第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁
4-194
MH89790B
Preliminary Information
Table 3. Master Control Word 1 (MCW1): Data Format for CSTi0 Channel 15
Table 4. Master Control Word 2 (MCW2): Data Format for CSTi0 Channel 31
Table 5. Multiframe Alignment Signal:Data Format for CSTi1Channel 0 on the Transmitted CEPT Link
BIT
NAME
DESCRIPTION
7
(N/A)
Keep at ‘1‘ for normal operation.
6
LOOP16
Channel 16 Loopback:
If ‘1‘, then timeslot 16 on the transmitted CEPT 2048 kbit/s link is
looped internally to replace the data received on timeslot 16. If ‘0,‘ then this function is
disabled.
This function only operates if frame synchronization is received from the CEPT link and only a
single timeslot can be looped within the frame.
5,4
(N/A)
Keep at ‘1‘ for normal operation.
3,2,
1
& 0
NDBD, NDBC,
NDBB
& NDBA
Signalling Bit Debounce:
If ‘1‘, then no debouncing is applied to the received A, B, C or D
signalling bits. If ‘0‘, then the received A, B, C or D signalling bits are debounced for between
6 and 8 ms.
BIT
NAME
DESCRIPTION
7
(N/A)
Keep at ‘1‘ for normal operation.
6
(N/A)
Keep at ‘0‘ for normal operation.
5
CCS
Common Channel Signalling:
If 1, then the MH89790B operates in its common channel
signalling mode. Channel 16 on the DSTi pin is transmitted on timeslot 16 of the CEPT link, and
timeslot 16 from the received CEPT link is output on channel 16 on the DSTo pin. Channel 15 on
the CSTi0 pin contains the information for the control of timeslot 16. Channels 0 to 15 on CSTi1
and CSTo are unused.
If ‘0‘, the device is in channel associated signalling mode where channel 16 is used to transmit
the ABCD signalling bits.
4
8kHzSEL
8kHz Select:
If ‘1‘, then an 8 kHz signal synchronized to the received CEPT 2048 kbit/s link is
output on the E8Ko pin. This feature is only valid when frame synchronization is received from
the CEPT link.
If ‘0‘, then the E8Ko pin goes into its high impedance state.
3
TXAIS
Transmit Alarm Indication Signal:
If ‘1‘, then an all 1’ s alarm signal is transmitted on all timeslots.
If ‘0‘, then the timeslots functions normally.
2
TXTS16AIS
Transmit Timeslot 16 Alarm Indication Signal:
If ‘1‘, then an all 1’s alarm signal is transmitted on timeslot 16.
If ‘0‘, then timeslot 16 functions normally.
1
XCtl
External Control:
If ‘1‘, then the XCtl pin is driven high.
If ‘0‘, then the XCtl pin is driven low.
0
(N/A)
(unused)
BIT
NAME
DESCRIPTION
7-4
MA1-4
Transmit Multiframe Alignment Bits 1 to 4:
These bits are transmitted on the CEPT 2048
kbit/s link in bit positions 1 to 4 of timeslot 16 of frame 0 of the multiframe. They should be kept at
‘0‘ to allow multiframe alignment to be detected.
3
X1
This bit is transmitted on the CEPT 2048 kbit/s link in bit position 5 of timeslot 16 of frame 0 of the
multiframe. It is a spare bit which should be kept at ‘1‘ if unused.
2
Y
This bit is transmitted on the CEPT 2048 kbit/s link in bit position 6 of timeslot 16 of frame 0 of the
multiframe. It is used to indicate the loss of multiframe alignment to the remote end of the link. A
‘1‘ on this bit is the signal that multiframe alignment on the received link has been lost. A ‘0’
indicates that multiframe alignment is detected.
1,0
X2,X3
These bits are transmitted on the CEPT 2048 kbit/s link in bit positions 7 and 8 respectively, of
timeslot 16 of frame 0 of the multiframe. They are spare bits which should be kept at ‘1‘ if unused.
相關PDF資料 |
PDF描述 |
|---|---|
| MH89790BS | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| MH89791 | CEPT PCM 30 Transmit Equalizer Advance Information |
| MH89792-1 | E1 Transceiver Preliminary Information |
| MH89792 | E1 Transceiver Preliminary Information |
| MH89792-2 | E1 Transceiver Preliminary Information |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MH89790BS | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:ST-BUS⑩ FAMILY CEPT PCM 30/CRC-4 Framer & Interface Preliminary Information |
| MH89791 | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:CEPT PCM 30 Transmit Equalizer Advance Information |
| MH89792 | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:E1 Transceiver Preliminary Information |
| MH89792-1 | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:E1 Transceiver Preliminary Information |
| MH89792-2 | 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:E1 Transceiver Preliminary Information |
發布緊急采購，3分鐘左右您將得到回復。