- 您現在的位置：買賣IC網 > PDF目錄371100 > MF6512M-02BJxx (Mitsubishi Electric Corporation) Composite Camera Cable; Number of Conductors:7; Conductor Size AWG:22; No. Strands x Strand Size:7 x 30; Jacket Material:Polyvinylchloride (PVC); Number of Pairs:3; Coaxial RG/U Type:59; Conductor Material:Copper RoHS Compliant: Yes PDF資料下載
參數資料
| 型號： | MF6512M-02BJxx |
| 廠商： | Mitsubishi Electric Corporation |
| 英文描述： | Composite Camera Cable; Number of Conductors:7; Conductor Size AWG:22; No. Strands x Strand Size:7 x 30; Jacket Material:Polyvinylchloride (PVC); Number of Pairs:3; Coaxial RG/U Type:59; Conductor Material:Copper RoHS Compliant: Yes |
| 中文描述： | 2.5閃存盤 |
| 文件頁數： | 11/18頁 |
| 文件大?。?/td> | 145K |
| 代理商： | MF6512M-02BJXX |
MITSUBISHI STORAGE CARD
Preliminary
MF6XXXX-02BJXX series
FLASH DRIVES
Oct.2000
. Rev. 0.3
MITSUBISHI
ELECTRIC
11/18
Standby(96h, E2h)
This command causes the card to set BSY, enter the
Standby mode, clear BSY and generate an interrupt.
Standby Immediate(94h, E0h)
This command causes the card to set BSY, enter the
Standby mode, clear BSY and generate an interrupt.
Translate Sector(87h)
This command allows the host to know the number of
times an user sector has been erased and programmed.
This card doesn't support the Hot Count value.
Wear Leveling(F5h)
Although this command is supported for backward
compatibility, it has no actual function. The card will always
return good status at the completion of this command.
Write Buffer(E8h)
This command enables the host to overwrite contents of the
card’s sector buffer with any data pattern desired. This
command has the same protocol as the Write Sector(s)
command and transfers 512 bytes.
Write DMA(CAh, CBh)
This command enables the host to write sector data by the
Multiword DMA protocol.
Write Long Sector(32h, 33h)
This command is similar to the Write Sector(s) except the
contents of the Sector Count register are ignored and only
one sector is written. The 512 data bytes and 4 ECC bytes
are transferred from the host and then written from the
buffer to the flash.
Write Multiple(C5h)
This command is similar to the Write Sector(s) command.
Interrupts are not presented on each sector, but on the
transfer of a block which contains the number of sectors
defined by Set Multiple command.
Write Multiple without Erase(CDh)
This command is similar to the Write Multiple command.
The sectors should be pre-erased with the Erase Sector
command before this command is issued. If the sector is not
pre-erased, Write Multiple command operation will occur.
Write Sector(s)(30h, 31h)
This command transfers data from the host to the card. Data
transfer starts at the sector specified by the Cylinder, Head,
and Sector Number registers, and proceeds for the number
of sectors specified in the Sector Count register.
Write Sector without Erase(CDh)
This command is similar to the Write Sector(s) command.
The sectors should be pre-erased with the Erase Sector
command before this command is issued. If the sector is not
pre-erased, Write Sector command operation will occur.
Write Verify(3Ch)
This command is similar to the Write Sector(s) command,
except each sector is verified immediately after being
written.
相關PDF資料 |
PDF描述 |
|---|---|
| MF84M1-GMCAVXX | 8/16-bit Data Bus Flash Memory Card |
| MF832M-GMCAVXX | 8/16-bit Data Bus Flash Memory Card |
| MF832M-GNCAVXX | MC 6P FR 12 16/1 PVC FLNGD RoHS Compliant: Yes |
| MF84M1-GNCAVXX | 8/16-bit Data Bus Flash Memory Card |
| MF88M1-GMCAVXX | 8/16-bit Data Bus Flash Memory Card |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MF65-4990-FB50W | 制造商:RCD Components Inc 功能描述: |
| MF65F302V | 功能描述:熱敏電阻 - NTC PRECISION +/-.1D-C RoHS:否 制造商:EPCOS 電阻:10 kOhms 功率額定值:150 mW 容差:2 % 端接類型:Radial 系列:B57703M 工作溫度范圍:- 55 C to + 125 C |
| MF6640M-02BJXX | 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:2.5 Flash Drive |
發布緊急采購，3分鐘左右您將得到回復。