TL/H/10399
M
December 1994
MF10
Universal Monolithic Dual
Switched Capacitor Filter
General Description
The MF10 consists of 2 independent and extremely easy to
use, general purpose CMOS active filter building blocks.
Each block, together with an external clock and 3 to 4 resis-
tors, can produce various 2nd order functions. Each building
block has 3 output pins. One of the outputs can be config-
ured to perform either an allpass, highpass or a notch func-
tion; the remaining 2 output pins perform lowpass and band-
pass functions. The center frequency of the lowpass and
bandpass 2nd order functions can be either directly depen-
dent on the clock frequency, or they can depend on both
clock frequency and external resistor ratios. The center fre-
quency of the notch and allpass functions is directly depen-
dent on the clock frequency, while the highpass center fre-
quency depends on both resistor ratio and clock. Up to 4th
order functions can be performed by cascading the two 2nd
order building blocks of the MF10; higher than 4th order
functions can be obtained by cascading MF10 packages.
Any of the classical filter configurations (such as Butter-
worth, Bessel, Cauer and Chebyshev) can be formed.
For pin-compatible device with improved performance refer
to LMF100 datasheet.
Features
Y
Easy to use
Y
Clock to center frequency ratio accuracy
g
0.6%
Y
Filter cutoff frequency stability directly dependent on
external clock quality
Y
Low sensitivity to external component variation
Y
Separate highpass (or notch or allpass), bandpass, low-
pass outputs
Y
f
O
c
Q range up to 200 kHz
Y
Operation up to 30 kHz
Y
20-pin 0.3
×
wide Dual-In-Line package
Y
20-pin Surface Mount (SO) wide-body package
System Block Diagram
TL/H/10399–1
Connection Diagram
Surface Mount and Dual-In-Line
Package
TL/H/10399–4
Top View
Order Number MF10AJ or MF10CCJ
See NS Package Number J20A
Order Number MF10ACWM or
MF10CCWM
See NS Package Number M20B
Order Number MF10ACN or
MF10CCN
See NS Package Number N20A
C
1995 National Semiconductor Corporation
RRD-B30M115/Printed in U. S. A.