
REVISIONS
REV. DESCRIPTION
1
V1.17
APPROVED
2006-03-01
The information in this publication is believed to be accurate in all respects at the time
of publication. MAZeT reserves the right to make changes in its products without notice
in order to improve design or performance characteristics.
DOC. NO:
DB-99-073e
Page 2 of 7
DATA-SHEET MCS3AS
1. FUNCTION
The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are
carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN
photo diodes allows signal frequencies up to MHz-range. In order to achieve a small
cross talk between the photodiodes the individual sectors have been separated from
each other by additional structures. Each of these photodiodes is sensitized with
dielectric spectral filter for its colour range, preferably for the primary colours red, green
and blue.
2. APPLICATION
Quality control
Monitoring the production
Control of manufacturing
Detection of colour marks
3. FEATURES
Dielectric filters guarantee the good optical properties of the colour sensors, such as:
high transmission
slight aging of the filter
high temperature stability
high signal frequency
reduced cross talk
small size (diameter of the optical sensitive surface ca. 2 mm)
4. CONSTRUCTION
3 on chip integrated PIN photo diodes
dielectric filters for the three colour ranges: red, green and blue
package design SOP8
Electrical connections
three anodes
one separated diode for minimization of the cross-talk
one common cathode
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com
USA: LASER COMPONENTS IG, Inc., Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk