參數資料
型號： MCP1253
廠商： Microchip Technology Inc.
英文描述： Low Noise, Positive-Regulated Charge Pump
中文描述： 低噪聲，正調節電荷泵
文件頁數： 9/18頁
文件大小： 440K
代理商： MCP1253
2002 Microchip Technology Inc.
DS21752A-page 9
MCP1252/3
4.0
DEVICE OVERVIEW
4.1
Theory of Operation
The MCP1252 and MCP1253 family of devices employ
a switched capacitor charge pump to buck or boost an
input supply voltage (V
IN
) to a regulated output voltage.
Referring to the Functional Block Diagram and
Figure 4-1, the devices perform conversion and regula-
tion in three phases. When the devices are not in shut-
down mode and a steady-state condition has been
reached, the three phases are continuously cycled
through. The first phase transfers charge from the input
to the flying capacitor (C
FLY
) connected to pins C+ and
C-. This phase always occurs for half of the internal
oscillator period. During this phase, switches S
1
and S
2
are closed.
Once the first phase is complete, all switches are
opened and the second phase (idle phase) is entered.
The device compares the internal or external feedback
voltage with an internal reference. If the feedback volt-
age is below the regulation point, the device transitions
to the third phase.
The third phase transfers energy from the flying capac-
itor to the output capacitor connected to V
OUT
and the
load. If regulation is maintained, the device returns to
the idle phase. If the charge transfer occurs for half the
internal oscillator period, more charge is needed in the
flying capacitor and the device transitions back to the
first phase.
The regulation control is hysteretic, otherwise referred
to as a bang-bang control. The output is regulated
around a fixed reference with some hysteresis. As a
result, typically 50 mV of peak-to-peak ripple will be
observed at the output independent of load current.
The frequency of the output ripple, however, will be
influenced heavily by the load current and output
capacitance. The maximum frequency that will be
observed is equal to the internal oscillator frequency.
The devices automatically transition between buck or
boost operation. This provides a low-cost, compact and
simple solution for step-down/step-up DC/DC conver-
sion. This is especially true for battery-operated appli-
cations that require a fixed output above or below the
input.
FIGURE 4-1:
Flow Algorithm.
START
PHASE 1:
Charge Transfer
From V
IN
to C
FLY
PHASE 2:
Idle State
V
FB
> V
REF
PHASE 3:
Charge Transfer
From C
FLY
to C
OUT
No
Yes
No
Yes
Yes
No
No
Yes
V
FB
> V
REF
t
1
= 2F
OSC
1
t
3
= 2F
OSC
1
相關PDF資料
PDF描述
MCP1525 2.5V AND 4.096V VOLTAGE REFERENCES
MCP1541 2.5V AND 4.096V VOLTAGE REFERENCES
MCP1630 High-Speed, Microcontroller-Adaptable, Pulse Width Modulator
MCP1630EMS High-Speed, Microcontroller-Adaptable, Pulse Width Modulator
MCP1630T High-Speed, Microcontroller-Adaptable, Pulse Width Modulator
相關代理商/技術參數
參數描述
MCP1253-33X50I/MS 功能描述:電荷泵 120mA Regulated RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube
MCP1253-33X50I/MS 制造商:Microchip Technology Inc 功能描述:DC/DC Charge Pump Converter (DC-DC) IC
MCP1253-ADJI/MS 功能描述:電荷泵 120mA Regulated Adj RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube
MCP1253T-33X50I/MS 功能描述:電荷泵 120mA Regulated RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube
MCP1253T-ADJI/MS 功能描述:電荷泵 120mA Regulated Adj RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 輸出電壓:- 1.5 V to - 5.5 V, 3 V to 11 V 輸出電流:100 mA 電源電流:1 mA 最大工作溫度:+ 70 C 封裝 / 箱體:SOIC-8 Narrow 封裝:Tube
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*