參數(shù)資料
型號: MC9SDP256BMPVR2
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
封裝: LQFP-112
文件頁數(shù): 100/134頁
文件大小: 1454K
代理商: MC9SDP256BMPVR2
MC9S12DP256B Device User Guide — V02.13
68
2.4.1 VDDX,VSSX — Power & Ground Pins for I/O Drivers
External power and ground for I/O drivers. Because fast signal transitions place high, short-duration
current demands on the power supply, use bypass capacitors with high-frequency characteristics and place
them as close to the MCU as possible. Bypass requirements depend on how heavily the MCU pins are
loaded.
2.4.2 VDDR, VSSR — Power & Ground Pins for I/O Drivers & for Internal
Voltage Regulator
External power and ground for I/O drivers and input to the internal voltage regulator. Because fast signal
transitions place high, short-duration current demands on the power supply, use bypass capacitors with
high-frequency characteristics and place them as close to the MCU as possible. Bypass requirements
depend on how heavily the MCU pins are loaded.
2.4.3 VDD1, VDD2, VSS1, VSS2 — Core Power Pins
Power is supplied to the MCU through VDD and VSS. Because fast signal transitions place high,
short-duration current demands on the power supply, use bypass capacitors with high-frequency
characteristics and place them as close to the MCU as possible. This 2.5V supply is derived from the
internal voltage regulator. There is no static load on those pins allowed. The internal voltage regulator is
turned off, if VREGEN is tied to ground.
NOTE:
No load allowed except for bypass capacitors.
2.4.4 VDDA, VSSA — Power Supply Pins for ATD and VREG
VDDA, VSSA are the power supply and ground input pins for the voltage regulator and the analog to
digital converter. It also provides the reference for the internal voltage regulator. This allows the supply
voltage to the ATD and the reference voltage to be bypassed independently.
2.4.5 VRH, VRL — ATD Reference Voltage Input Pins
VRH and VRL are the reference voltage input pins for the analog to digital converter.
2.4.6 VDDPLL, VSSPLL — Power Supply Pins for PLL
Provides operating voltage and ground for the Oscillator and the Phased-Locked Loop. This allows the
supply voltage to the Oscillator and PLL to be bypassed independently.This 2.5V voltage is generated by
the internal voltage regulator.
NOTE:
No load allowed except for bypass capacitors.
相關PDF資料
PDF描述
MCAQE16G6APP-MXA FLASH MEMORY DRIVE CONTROLLER, PQFP
MCBOE32GQAPQ-MWA FLASH MEMORY DRIVE CONTROLLER, PBGA
MC8DE08GQAPR-MWA FLASH MEMORY DRIVE CONTROLLER, PBGA
MCC3E0RX180WB0B 180 MHz, RISC PROCESSOR, CBGA728
MCCF68HC08LK60 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, UUC150
相關代理商/技術參數(shù)
參數(shù)描述
MC9SDT128BMPVR2 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Freescale Semiconductor 功能描述:
MC9SDT256BCPVR2 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC9SXDP512VPVR2 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Freescale Semiconductor 功能描述:
MC9Z-2DB 制造商:IDEC CORPORATION 功能描述:MC2D Color Scrn 2-split top/bt
MC9Z-3DB 制造商:IDEC CORPORATION 功能描述:Super Bright Led Or Incandescent Lamp Illumination Rectangular- And Square-Body Control Units