CALRAM 2K
MC9S12T64Revision 1.1.1
244
CALRAM 2K
MOTOROLA
Recommended
Calibration Flow
Following flow is recommended to calibrate the 2K byte Flash EEPROM
array area. It is assumed that this flow is executed after reset without
initialization of the registers INITCRM and CALCFG.
1.
Copy a 2K byte block of data from the Flash EEPROM into the 2K
byte CALRAM array.
Figure 33
shows an example. This is the first
step for calibration, but this step may be skipped when
initialization for calibration block is not needed.
The data to be calibrated in Flash EEPROM has to be located within the
2K byte area which is overlapped by the CALRAM.
Figure 33 Copy Data from Flash EEPROM to CALRAM
2K bytes
$0000
$FFFF
Data to be calibrated
Flash EEPROM
Block 1
Copy data from Flash EEPROM
to CALRAM
Flash EEPROM
Block 0
2K bytes
CALRAM
MCU Control program is running from
this block
$8000
F
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
.