參數資料
型號: MC44BS373CAFCR2
廠商: Freescale Semiconductor
文件頁數: 18/52頁
文件大?。?/td> 0K
描述: IC MODULATOR AUD/VID U/V 20-QFN
標準包裝: 2,500
類型: NTSC/PAL 調制器
應用: 音頻/視頻,VCR,機頂盒
安裝類型: 表面貼裝
封裝/外殼: 20-VQFN 裸露焊盤
供應商設備封裝: 20-QFN 裸露焊盤(5x5)
包裝: 帶卷 (TR)
MC44BS373CA Data Sheet
MC44BS373CA Modes of Operation
15.11 Sound Section
The oscillator is fully integrated and does not require any external components. An internal low-pass filter
and matched structure provide very low harmonics levels.
The sound modulator system consists of an FM modulator incorporating the sound subcarrier oscillator. The
audio input signal is AC-coupled into the amplifier, which then drives the modulator. For mono applications,
the audio pre-emphasis circuit is a high-pass filter with an external capacitor and an internal resistor
(106 K
typical).
The recommended capacitor value for BG standard (with a time constant of 50
S) is 470 pF.
The recommended capacitor value for M/N standard (with a time constant of 75
S) is 750 pF.
The sound reference divider is a programmable divide-by-128 or divide-by-64, resulting in a reference
frequency of 31.25 kHz or 62.5 kHz with a 4.0-MHz crystal.
This reference frequency can be selected by bus (bit SREF), depending on the application. For instance,
when the audio bandwidth is required to be extended (for stereo application), it is possible to select the
higher value (62.5 kHz) to avoid any interference between the reference and the audio signals.
For stereo applications, the audio signal is already encoded in the baseband stereo encoder. It is not
necessary to use a pre-emphasis, and in this case the pre-emphasis capacitor must be removed.
Sometimes for the same application it is useful to increase the FM deviation. To increase FM deviation,
replace the original pre-emphasis capacitor with a fixed 100-nF capacitor. Adding this value boosts the
deviation and does not create a pre-emphasis.
Without pre-emphasis, the audio bandwidth extends to 60 kHz.
To increase the audio bandwidth at low frequencies it is recommended to change the sound PLL loop filter.
It is also recommended to increase the values of the loop filter capacitors. The recommended values are 1
F
and 100 nF.
It is possible to create a peak for the low frequencies (from 30 to 80 Hz) by adjusting the resistor of the sound
loop filter. A flat response is given with a value of 5.6 K
but this value can be set to 4.7 K. This gives a
peak of about 1 dB at 40 Hz and extends the low-frequency cut-off to 28 Hz.
The following figure plots the resulting bandwidth for low frequencies and for the whole bandwidth (up to
60 kHz).
The first chart represents the audio bandwidth for low frequencies (20 to 150 Hz) for two sets of sound loop
filters. The first set with 1
F + 100 nF + 5.6 K gives a flat response. The second set with 1 F + 100 nF
+ 4.7 K
gives a peak of about 1 dB at 60 Hz. It is possible to adjust this peak by changing the resistor value.
相關PDF資料
PDF描述
MC44BS374CAEFR2 IC AUDIO/VIDEO MODULATOR 16-SOIC
MC44BS374T1AEFR2 IC AUDIO/VIDEO MODULATOR 16-SOIC
MC56F8013VFAE IC DIGITAL SIGNAL CTLR 32-LQFP
MC56F8014MFAE IC DIGITAL SIGNAL CTLR 32-LQFP
MC56F8023VLC IC DSP 16BIT DUAL HARV 32-LQFP
相關代理商/技術參數
參數描述
MC44BS373CAR2 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:PLL-Tuned UHF and VHF Audio/Video High-Integration Modulator
MC44BS373CR2 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:PLL-Tuned UHF and VHF Audio/Video High-Integration Modulator
MC44BS374 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:MC44BS374
MC44BS374CA 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:SO16NB Package
MC44BS374CAD 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:CMOS Audio/Video RF Modulators